Samsung Lacie720, Service Manual

Page: 74 / 85

14 Reference Infomation
14-2
- Auto Configuration
This is an algorithm to adjust monitor to optimum
condition by pushing one key.
- OSD(On Screen Display)
On screen display. customer can control the
screen easily with this.
- Image Lock
This means "Fineness adjustment" in LCD
Monitor, the features are "Fine" and "Coarse"
- FINE
"Fine" adjustment is used to adjust visibility by
control phase difference.
- COARSE
This is a adjustment by tuning with Video colck
and PLL clock.
- DVI (Digital Visual Interface)
This provides a high speed digital connection for
visual data types that is display technology inde-
pendent. this interface is primarily forcused at pro-
viding a connection between a computer and its
display device.
- L.V.D.S.(Low Voltage Differential Signaling)
a kind of transmission method for Digital. It can be
used from Main PBA to Panel.
- T.M.D.S.
(Transition minimized Differential Signaling)
a kind of transmission method for Digital. It can be
used from Video card to Main PBA.
- DDC(Display data channel)
It is a communication method between Host
Computer and related equipment. It can make it
Plug and Play between PC and Monitor.
- EDID(Extended Display Identification Data)
Extended Display Identification Data PC can rec-
ognize the monitor information as Product data,
Product name,Display mode,Serial number and
Signal source,etc through DDC Line communicat-
ing with PC and Monitor.
- Dot Pitch
The image on a monitor is composed of red, green
and blue dots. The closer the dots, the higher the
resolution. The distance between two dots of the
same color is called the 'Dot Pitch'. Unit: mm
- Vertical Frequency
The screen must be redrawn several times per
second in order to create and display an image for
the user. The frequency of this repetition per sec-
ond is called Vertical Frequency or Refresh Rate.
Unit: Hz
Example: If the same light repeats itself 60 times
per second, this is regarded as 60 Hz.
- Horizontal Frequency
The time to scan one line connecting the right
edge to the left edge of the screen horizontally is
called Horizontal Cycle. The inverse umber of the
Horizontal Cycle is called Horizontal Frequency.
Unit: kHz
- Non-interlace and Interlace Methods
Showing the horizontal lines of the creen from the
top to the bottom in order is called the Non-
Interlace method while showing odd lines and then
even lines in turn is called the Interlace method.
The Non-Interlace method is used for the majority
of monitors to ensure a clear image. The Interlace
method is the same as that used in TVs.
- Plug & Play
This is a function that provides the best quality
screen for the user by allowing the computer and
the monitor to exchange information utomatically.
This monitor follows the international standard
VESA DDC for the Plug & Play function.
- Resolution
The number of horizontal and vertical dots used to
compose the screen image is called 'resolution'.
This number shows the accuracy of the display.
High resolution is good for performing multiple
tasks as more image information can be shown on
the screen.