background image

English - 

MEDIA PLAY (USB)

Using the Media Play (USB) Function

This function enables you to view and listen to photo (JPEG) and audio files (MP3) saved on a 

USB Mass Storage Class (MSC) device.

Press the 

POWER

 button on the remote control or your set. Connect a USB device containing 

JPEG and/or MP3 files to the 

Media Play (USB)

 jack (USB jack) on the side of the TV.

If you enter the 

Media Play (USB)

 mode with no USB device connected the message ‘There 

is no device connected’ will appear. In this case, insert the USB device, exit the screen by 

pressing the 

MEDIA.P

 button on the remote control and enter the 

Media Play (USB)

 screen 

again.

Only alphanumeric characters must be used as a folder name or file name (photo, music).

The file system only supports FAT16/32 (The NTFS file system is not supported) Certain types of USB Digital camera and 

audio devices may not be compatible with this TV.

Media Play (USB) only supports the USB Mass Storage Class device (MSC). MSC is a Mass Storage Class Bulk-Only 

Transport device. Examples of MSC are Thumb drives and Flash Card Readers (Both USB HDD and HUB are not supported.)

Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data. SAMSUNG is 

not responsible for any data file damage or data loss.

Please connect directly to the USB port of your TV. If you are using a separate cable connection, there may be a USB 

Compatibility problem.

Only MP3 and JPEG file formats are supported.

The Media Play (USB) mp3 format only supports music files with a high sampling frequency (32 kHz, 44.1 kHz, or 48 kHz).

We recommend the sequential jpeg format.

Do not disconnect the USB device while it is loading.

MTP (Media Transfer Protocol) is not supported.

The playing duration of an mp3 file may be displayed as ‘00:00:00’ if its playing time information is not found at the start of the 

file.

The higher the resolution of the image, the longer it takes to display on the screen.

The Photo or Music List displays up to 300 folders or files.

Loading may take some time depending on the size of the file.

MP3 files with DRM that have been downloaded from a non-free site cannot be played. Digital Rights Management (DRM) 

is a technology that supports the creation of content, the distribution and management of the content in an integrated and 

comprehensive way, including the protection of the rights and interests of the content providers, the prevention of the illegal 

copying of contents, as well as managing billings and settlements.

¦

N

N

N

N

N

N

N

N

N

N

N

N

N

N
N

TV Real Panel

USB Drive

[480]BN68-01911B-00.indb   21

2009-04-03   �� 5:47:20

Summary of Contents for LA22B480







































Reviews: