viewing
_13
ENGLISH
Remote control display
Air swing indicator
Operating mode
indicator
Set temperature
indicator
indicator
On/Off Timer indicator
Fan speed indicator
Installing the batteries
Using the remote control
•
Point the remote control towards the remote control sensor of the unit.
•
When properly pressing the button on the remote control, you will hear beep sound from the unit.
•
The signal may not be received well of electronic lighting style fluorescent lamps,
such as inverter fluorescent lamps are in the same space.
•
If other electrical products operate by the remote control, call your nearest contact center.
1. Slide the cover, on the
rear side of the remote
control, down to open.
2. Install two AAA
batteries.
Check and match the “+”
and “-” signs accordingly.
Make sure you have
installed the batteries in
correct position.
3. Close the cover by
sliding it back to its
original position.
You should hear click
sound when the cover is
locked properly.
Low battery
indicator
Transmit indicator
Silence indicator
[Correct disposal of batteries in this product]
(Applicable in the European Union and other European countries with separate
battery return systems.)
This marking on the battery, manual or packaging indicates that the batteries in this product
should not be disposed of with other household waste at the end of their working life. Where
marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury,cadmium
or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed
of, these substances can cause harm to human health or the environment.
To protect natural resources and to promote material reuse, please separate batteries from other
types of waste and recycle them through your local, free battery return system.
