manualshive.com logo in svg

Samsung iPolis SNB-5000, User Manual

Share
Download
Samsung iPolis SNB-5000 User Manual Download Page 32

installation & connection

32_

 installation & connection

3. 

Drill a hole (diameter: 5mm, depth: min 35mm) at a 

desired position while aligning to a hole of the case 

bottom and fully insert the provided plastic anchor 

(HUD 5) into the hole. Align the hole of the case 

bottom to the inserted anchor, and fasten the ASSY 

tapping screw (TH M4xL30).

 

M

 

`

When assembling the camera case to a junction box, 

select appropriate screw holes on the case bottom for 

installation.

4. 

Connect power and video cables and arrange 

cable running not to damage or squeeze them, and 

assemble the camera unit in the reverse way.

5. 

Adjust the lens aiming to your desired direction.

6. 

Assemble the Dome Cover. 

For waterproof purpose, fix and secure the bolt using L-wrench provided.

 

`

For improved EMC performance, it is recommended 

to use the insulation cap provided as an accessory.

 

M

 

`

For the wall mounting installation and how to connect the alarm cables, refer to the installation 

instructions of SND-5080F. (pages 27~28)

CAMERA FRONT

Summary of Contents for iPolis SNB-5000

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands