Samsung iPolis SNB-5000 User Manual Download Page 13

Page: 13 / 144

English

_13

●

over

view

The Test Monitor Cable is connected to a portable displayer and used for testing the camera.

If you intend to use it for an actual monitoring camera, use the BNC cable instead.

For improved EMC performance, it is recommended to use the insulation cap provided as an

accessory.

at a GLance (SnB-5000)

front Side

Item

Description

Camera Holder

(Mount) Holes

Used when you mount the camera onto the bracket by fixing the camera

holder (mount) adaptor with the bracket.

Auto Iris Lens

(Optional)

Installed on the lens adaptor.

Auto Iris Lens

Connector

Used to supply power and output signal to control the iris of the lens.

Wipe out a dirty surface of the lens softly with a lens tissue or cloth to which you have applied

ethanol.

Summary of Contents for iPolis SNB-5000

















































































































































Search results

Summary of Contents for iPolis SNB-5000

Reviews:

Related manuals for iPolis SNB-5000

Brands by name

Popular brands

Samsung iPolis SNB-5000, User Manual

Search results

Summary of Contents for iPolis SNB-5000

Reviews:

Related manuals for iPolis SNB-5000

Brands by name

Popular brands