PART 5. GENERAL USER INFORMATION
5.1 RADIO FREQUENCY INTERFERENCE
WARNING
: This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is oper-
ated in a commercial environment. This equipment generates, uses and can radiate ra-
dio frequency energy. If not installed and operated in accordance with the instruction
manual, it may cause interference with radio communications. Operation of this equip-
ment in a residential area is likely to cause harmful interference in which case the user will
be required to correct the interference at his own expense.
The following measures can be tried:
1. Reorient the receiving antenna.
2. Relocate the telephone with respect to the receiver.
3. Move the telephone equipment away from the receiver.
4. Plug the Key Service Unit into a different AC outlet so that the KSU and receiver are on
different circuits.
5.2 FCC REQUIREMENTS
The IDCS 100 Private Automatic Branch Exchange (PABX) system complies with part 68
of the Federal Communications Commission Rules and Regulations.
UNAUTHORIZED MODIFICATIONS
Any changes or modifications performed on this equipment that are not expressly ap-
proved in writing by SAMSUNG TELECOMMUNICATIONS AMERICA could cause non-
compliance with the FCC rules and void the user’s authority to operate the equipment.
NOTIFICATION TO TELEPHONE COMPANY
The customer must notify the telephone company of the particular line to which the con-
nection will be made and provide it with the FCC registration number and the Ringer
Equivalence Number (REN) of the protective circuit. On the right side of the PABX System
is a label that contains the FCC registration number and ringer equivalence number (REN)
for this equipment.
FCC Registration Numbers: A3LKOR-32706-KF-E or A3LKOR-32705-MF-E
Ringer Equivalence Number: 0.5 B
TELEPHONE CONNECTION REQUIREMENTS
The Federal Communications Commission (FCC) has established rules which permit the
IDCS 100 to be connected directly to the telephone network using telephone company
network access jacks.
5.1
HOME
PAGE
Table of
Contents
