background image

Cleaning Your Air Conditioner

E-

24

For the best use of your air conditioner, you must clean it every two
weeks regularly to remove the dust that accumulates on the air filter.

Before cleaning your air conditioner, ensure that you
have switched off the breaker used for the unit.

2

Open the upper front grille by pulling right and left sides of the grille.

1

Slide the lower front grille down.

4

Lift out the bottom edge of the air filters and pull down to release them.

5

Remove all dust on the air filters with a vacuum cleaner or brush.

6

When you have finished, insert the top part of the filters into their slot
and push down on the bottom edge until they click into place.

7

Clean the front grille with a damp cloth and mild detergent (do NOT use
benzene, solvents or other chemicals).

3

Disassemble the upper front grille by opening the grille completely.

8

Fix the left side of grille support, then insert the right side of grille support.

IM

PORTANT

Hook

Body groove

Grille support

Lower

front

grille

N

N

N

N

o

o

o

o

tt

tt

e

e

e

e

◆ 

If you have not used the air conditioner for a long period of time, set the
fan going for three to four hours to dry the inside of the air conditioner
thoroughly.

◆ 

To close the upper front grille completely after cleaning filters, turn on

and turn off the air conditioner.

Cleaning Deodorizing and Bio Filters (Option)

3

Wash the filters with clean water, then dry them in the shade.

2

Pull out the deodorizing and Bio filters.

1

Open the upper front grille by pulling right and left sides of the grille.

To remove minute dust particles and odors, deodorizing and Bio filters
are installed in the air conditioner. You should clean the filters every 
3 months.

5

Close the front grille.

4

Insert the filters into the original position.

N

N

N

N

o

o

o

o

tt

tt

e

e

e

e

You can change the position of filters with each other.

Bio Filter

Deodorizing Filter

Summary of Contents for IAST24P6GBDXAP



























Reviews: