ENG - 11
03 USING THE REMOTE CONTROL
How to Use the Remote Control
Power
Turns the Soundbar on and off.
•
Auto Power Down Function
The unit turns off automatically in the following
situations:
– In
D.IN
/
Wi-Fi
/
BT
mode if there is no audio
signal for 18 minutes.
D.IN
Press to enter the “
D.IN
” mode.
Source
Press to select a source connected to the Soundbar.
Mute
Press the
(Mute)
button to mute the sound.
Press it again to unmute the sound.
Sound
Control
When pressed, the setting items such as
TREBLE
, or
SYNC
are displayed in sequence. The desired item
can be adjusted using the
Up
/
Down
buttons.
– To adjust the
TREBLE
volume, select Sound
Control →
TREBLE
, and then use the
Up/Down
buttons to adjust the volume within a -6 to +6
range.
– Press and hold the
(Sound Control)
button
for about 5 seconds to adjust the sound for each
frequency band. 150Hz, 300Hz, 600Hz, 1.2kHz,
2.5kHz, 5kHz, and 10kHz are selectable using
the
Left/Right
buttons and each can be
adjusted to a setting between -6 to +6 using
the
Up/Down
buttons. (Make sure the Sound
mode is set to “
STANDARD
”.)
– If the video on the TV and audio from the
Soundbar are not synchronized, select
SYNC
in
Sound Control, and then set the audio delay
between 0~300 milliseconds by using the
Up/
Down
buttons.
–
SYNC
is only supported for some functions.
