ENG - 25
•
A Bluetooth device may experience noise or malfunction under in the following conditions:
– When the body is in contact with the signal transceiver on the Bluetooth device or Soundbar
– In corners or when there is an obstacle in proximity, such as a wall or partition, where electrical
changes may occur.
– When exposed to radio interferences by other products operating on the same frequency
ranges, such as medical equipment, microwave ovens, and wireless LAN devices.
– Obstacles such as doors and walls may still impact the sound quality even when the devices
are within the effective range.
•
Note that your Soundbar cannot be paired with other Bluetooth devices while using the Bluetooth
option.
•
This wireless device may cause electrical interference during operation.
Disconnecting the Bluetooth device from a Soundbar
You can disconnect a Bluetooth device from the Soundbar. For instructions, see the Bluetooth device’s
user manual.
•
The Soundbar will be disconnected.
•
When the Soundbar is disconnected from the Bluetooth device, the Soundbar will display
“
BT DISCONNECTED
” on the front display.
Disconnecting the Soundbar from the Bluetooth device
Press the
(Source)
button on the bottom panel or on the remote control, and then change to any
mode except “
BT
”.
•
Disconnecting takes time because the Bluetooth device must receive a response from the
Soundbar. (Disconnection time may differ, depending on the Bluetooth device)
•
When the Soundbar is disconnected from the Bluetooth device, the Soundbar will display
“
BT DISCONNECTED
” on the front display.
