ENG
29
28
FUNCTIONS
FUNCTIONS
●
If asked for a PIN code when connecting a Bluetooth device, enter <0000>.
●
Only one Bluetooth device can be paired at a time.
●
The Bluetooth connection will be terminated when you turn the Soundbar off.
●
The Soundbar may not perform Bluetooth search or connection correctly under the following
circumstances:
-
If there is a strong electrical field around the Soundbar.
-
If several Bluetooth devices are simultaneously paired with the Soundbar.
-
If the Bluetooth device is turned off, not in place, or malfunctions.
●
Note that such devices as microwave ovens, wireless LAN adaptors, fluorescent lights, and gas stoves use
the same frequency range as the Bluetooth device, which can cause electric interference.
●
The Soundbar supports SBC data (44.1kHz, 48kHz).
●
Connect only to a Bluetooth device that supports the A2DP (AV) function.
●
You cannot connect the Soundbar to a Bluetooth device that supports only the HF (Hands Free) function.
●
Once the set has been paired with a device, if the soundbar is in DIN, AuX, or uSB mode and you select
“[AV]samsung soundbar Kxxx K-ser" from your Bluetooth device's list, the set will automatically change to
BT
mode.
-
Available only if the Soundbar is listed among the Bluetooth device’s paired devices. (The Bluetooth
device and the Soundbar must have been previously paired at least once.)
●
Soundbar will appear in the Bluetooth device’s searched devices list only when the Soundbar is displaying
BT READy
.
●
In the TV SoundConnect mode, the Soundbar cannot be paired or connected to another Bluetooth device.
BLUETOOTH POWER On (BLUETOOTH POWER)
If a previously paired Bluetooth device tries to pair with the Soundbar when the Bluetooth POWer On function is on
and the Soundbar is turned off, the Soundbar turns on automatically.
1.
Press the
Bluetooth POWER
on the remote while the Soundbar is turned on.
2. On - BLUETOOTH POWER
appears on the Soundbar's display.
TO DISCOnnECT A BLUETOOTH DEVICE FROM THE
SOUnDBAR
You can disconnect the Bluetooth device from the Soundbar. For instructions, see the Bluetooth device's user manual.
●
The Soundbar will be disconnected.
●
When the Soundbar is disconnected from the Bluetooth device, the Soundbar will display
BT DISCOnnECTED
on the front display.
TO DISCOnnECT THE SOUnDBAR FROM A BLUETOOTH
DEVICE
Press the
SOURCE
button on the remote control or the
(Source) button on the product's side panel to switch
from
BT
to another mode or turn off the Soundbar.
●
The connected Bluetooth device will wait a certain amount of time for a response from the Soundbar before
terminating the connection. (Disconnection time may differ, depending on the Bluetooth device)
●
In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the Soundbar
and the Bluetooth device exceeds 10 meters.
●
The Soundbar automatically turns off after 5 minutes in the ready state.
+
More About Bluetooth
Bluetooth is a technology that enables Bluetooth-compliant devices to interconnect easily with each other using a
short wireless connection.
●
A Bluetooth device may cause noise or malfunction, depending on usage, if:
-
A part of your body is in contact with the receiving/transmitting system of the Bluetooth device or the
Soundbar.
-
It is subject to electrical variation from obstructions caused by a wall, corner, or office partition.
-
It is exposed to electrical interference from same frequency-band devices including medical equipment,
microwave ovens, and wireless LANs.
●
Pair the Soundbar with the Bluetooth device while they are close together.
●
The further the distance between the Soundbar and Bluetooth device, the worse the quality is.
If the distance exceeds the Bluetooth operational range, the connection is lost.
●
In poor reception areas, the Bluetooth connection may not work properly.
●
The Bluetooth connection only works when it is close to the unit. The connection will be automatically cut off if the
Bluetooth device is out of range. even within range, the sound quality may be degraded by obstacles such as
walls or doors.
●
This wireless device may cause electric interference during its operation.
USIng THE SAMSUng AUDIO REMOTE APP
+
Installing the Samsung Audio Remote App
To control the Soundbar with your smart device and the Samsung Audio remote app, download the Samsung Audio
remote app from Google Play store.
Market search : Samsung Audio Remote
+
Launching the Samsung Audio Remote App
To launch and use the Samsung Audio remote app, touch the Audio remote icon on your smart device, and then
follow the directions on the screen.
●
The Samsung Audio remote app is only compatible with Android mobile phones and mobile devices
running Android OS 3.0 or later.
