English
37
03
Setup
Setting the Test Tone
Use the test tone to check the speaker connection status or level.
Press the
SETUP/MENU
button on the remote control.
Each time the button is pressed, the mode switches between
INPUT
and
SETUP OFF
.
Press the ▲▼ buttons to select
SPEAKER
, and then press
the
ENTER
button.
Press the ▲▼ buttons to select
TEST TONE
, and then press
the
ENTER
button.
Press the ▲▼ buttons to select the option you want, and then
press the
ENTER
button.
AUTO
: Test signal will be automatically output as follows;
F.L
CEN
S.W
F.R
S.R
S.L.
- During test tone output, press the
▲▼
buttons to adjust the
speaker output level from -10 to +10 dB by 1 step.
MANUAL
: Enables you to adjust the output level of the
speaker manually.
1) Press the
ENTER
button to select the speaker
you want.
Each time you press the
ENTER
button, F.L
CEN
S.W
F.R
S.R
S.L will be
selected in turn.
2) Press the ▲▼ buttons to set the Test Tone
mode you want.
You can adjust the speaker output level from -10
to +10dB by 1 step.
The sound gets quieter at -10dB and louder at
+10dB.
- Test Tone Output -
• F.L (front left) : -10 ~ +10dB
• CEN (center) : -10 ~ +10dB
• F.R (front right) : -10 ~ +10dB
• S.W (subwoofer) : -10 ~ +10dB
• S L (surround left) : -10 ~ +10dB
• SBL (surround back left) : -10 ~ +10dB
• S.R (surround right) : -10 ~ +10dB
• SBR (surround back right) : -10 ~ +10dB
- To stop test tone -
Press the
SETUP/MENU
button once.
SETUP OFF
appears on the display and test tone stops.
NOTE
In the Dolby Pro Logic IIx mode, test signal will be automatically output as follows :
F.L
CEN
S.W
F.R
S.R
SBR
SBL
S.L.
In the Dolby Pro Logic IIz mode, test signal will be automatically output as follows :
F.L
FHL
CEN
S.W
FHR
F.R
S.R
S.L.
1.
•
2.
3.
4.
•
•
•
✎
>
MOVE
SELECT
'
RETURN
EXIT
▲
F L
0 d B
▼
SL
0dB
SR
0dB
FR
0dB
C
0dB
SW
0dB
USER
MANUAL
HW-D600_D650S_XAC_0614.indd 37
HW-D600_D650S_XAC_0614.indd 37
2011-06-17 10:35:21
2011-06-17 10:35:21
