35
ENG
●
SETUP
SETTING THE SPEAKER SIZE
Signal outputs and frequency response from the speaker will be adjusted according to your speaker confi guration and whether
certain speakers are used or not.
Press the
SETUP/MENU
button.
Each time the button is pressed, the mode switches between
SETUP
ENTER
and
SETUP OFF
.
Press the
ENTER
button to select
SETUP ENTER
.
Press the ▲▼ buttons to select
SPK SIZE
, and then press the
ENTER
or ► button.
Press the ▲▼ buttons to select the speaker you want, and then press
the
ENTER
or ► button.
Each time you press the ▲▼ buttons, FRONT
Æ
CENTER
Æ
SURR
Æ
SUBW
Æ
CROVR will be selected in turn.
Press the ▲▼ buttons to set the mode (LARGE, SMALL etc.) for the
selected speaker.
Repeat steps 3-5 to set the mode for each speaker.
- To exit setup mode -
Press the
SETUP/MENU
button.
SETUP OFF
appears on the display and Setup Mode is exited.
Setting the Speaker
SPEAKER
Possible Settings
Default Setting
FRONT (Front)
LARGE, SMALL
SMALL
CENTER (Center)
LARGE, SMALL, NONE
SMALL
SURR (Surround)
LARGE, SMALL, NONE
SMALL
SUBW (Subwoofer)
YES, NO
YES
CROVR (Crossover Frequency)
60, 80, 100,120, 150, 180, 200(Hz) 100Hz
LARGE : Select when using large speakers. You can listen to full range sound.
SMALL : Select this when using small speakers
NONE : Select when no speaker is used
YES (subwoofer) : Select when using the subwoofer speaker.
NO (subwoofer) : Select when not using the subwoofer speaker.
CROVR : Select the crossover frequency for the best bass response in your room.
You can also use
SETUP
,
,
,
.
,
<
,
>
,
ENTER
on the front of your AV Receiver.
When the Front speaker is only set to LARGE, you can select LARGE of other speakers.
1.
•
2.
3.
4.
•
5.
6.
•
•
•
•
•
•
•
M
Æ
Æ
HW-C500-C560S-XAA_0609.indd 35
HW-C500-C560S-XAA_0609.indd 35
2010-06-09 5:11:31
2010-06-09 5:11:31
