English - 5
English - 4
Manually connecting the Subwoofer
;
;
;
Subwoofer
5 Sec
Blinking
blue fast
;
;
;
Red and Blue is On
Remote
Control
SOUNDBAR
연결
음량
우퍼레벨
사운드
모드
SOUNDBAR
연결
음량
우퍼레벨
사운드
모드
5 Sec
First, press the button on the
remote control to turn on the
display, and then press the
Up
button on the remote control
for at least 5 seconds.
Soundbar
ID SET
Connection
complete
The
LINK
LED indicator stops blinking and
glows a solid blue (connection complete).
NOTES
•
If you use a device that uses the same frequency (5.8GHz) as
the Soundbar near the Soundbar, interference may cause some
sound interruption.
•
The maximum transmission distance of the main unit’s wireless
signal is about 10 m, but may vary depending on your operating
environment.
04 CONNECTING WITH A
CABLE
Optical Cable
TV / BD / DVD
player / Set-top
box / Game
console
Bottom of the
Soundbar
HDMI IN
(ARC)
HDMI OUT
OPTICAL OUT
HDMI 입력
(ARC)
HDMI 출력
OPTICAL 출력
USB (5V 0.5A)
DIGITAL AUDIO IN
(OPTICAL)
POWER
USB (5V 0.5A)
DIGITAL AUDIO IN
(OPTICAL)
POWER
D.IN
mode
NOTE
•
When you use an optical cable and the terminals have covers, be
sure to remove the covers.
05 CONNECTING WIRELESSLY
Connecting a TV or Bluetooth Device via
Bluetooth
OR
OR
Top of the Soundbar
5 Sec
BT PAIRING
SOUN
D
MOD
E
PAIR
What is the difference between BT READY and BT
PAIRING?
•
BT READY
: In this mode, you can search for previously
connected TVs or connect a previously connected mobile device
to the Soundbar.
•
BT PAIRING
: In this mode, you can connect a new device to
the Soundbar. (Press the
PAIR
button on the remote control
or press and hold the
(Source)
button on the top of the
Soundbar for more than 5 seconds while the Soundbar is in “
BT
”
mode.)
NOTE
•
If asked for a PIN code when connecting a Bluetooth device,
enter <0000>.
06 TROUBLESHOOTING
Before seeking assistance, check the following.
Soundbar does not turn on.
•
Check whether the power cord of the Soundbar is correctly inserted
into the outlet.
Soundbar works erratically.
•
After removing the power cord, insert it again.
•
Try again after reset the product.
•
If there is no signal, the Soundbar automatically turns off after a
certain period of time. Turn on the power.
In case the remote control does not work.
•
Point the remote directly at the Soundbar.
•
Replace the batteries with new ones.
Soundbar does not output any sound.
•
The volume of the Soundbar is too low or muted. Adjust the volume.
•
When any external device (STB, Bluetooth device, mobile device, etc.)
is connected, adjust the volume of the external device.
•
For sound output of the TV, select Soundbar. (Samsung TV: Home
(
) → Settings ( ) → Sound → Sound Output → Select Soundbar)
•
Remove the cable from the Soundbar and then reconnect it.
Subwoofer does not output any sound.
•
Check whether the LED on the rear of the Subwoofer lights in blue.
Reconnect it when the blue LED blinks or the red LED lights.
Soundbar does not connect via Bluetooth.
•
When connecting a new device, switch to “
BT PAIRING
” for
connection. (Press the
PAIR
button on the remote control or press
the
(Source)
button on the body for at least 5 seconds.)
•
Reconnect it after removing the Bluetooth speaker list on the device
to connect. (Samsung TV: Home (
) → Settings ( ) → Sound →
Sound Output → Bluetooth Speaker List)
Sound drops out when connected via Bluetooth.
•
Some devices can cause radio interference if they are located too
close to the Soundbar. e. g. microwaves, wireless routers, etc.
•
If your device that is connected via Bluetooth moves too far away
from the Soundbar, it may cause the sound to drop out. Move the
device closer to the Soundbar.
•
If a part of your body is in contact with the Bluetooth transceiver
or the product is installed on metal furniture, sound may drop out.
Check the installation environment and conditions for use.
Soundbar does not turn on automatically with the TV.
•
When you turn off the Soundbar while watching TV, power
synchronization with the TV is disabled. First turn off the TV.
