ENG
15
Choose one of the four methods for connecting to a TV.
Connecting the Video Out to TV
Speakers can be installed either as stand or wall-mounted type speakers.
Installing Speakers
- Connect the supplied video cable from the VIDEO OUT jack on the back panel of the system
to the VIDEO IN jack on your TV.
Composite Video
.......
(Good Quality)
METHOD 1
- If your television is equipped with an S-Video input, connect an S-Video cable (not supplied) from
the S-VIDEO OUT jack on the back panel of the system to the S-VIDEO IN jack on your television.
S-Video
.......
(Good Quality)
METHOD 2
- If your television is equipped with Component Video inputs, connect a component video cable
(not supplied) from the Pr, Pb and Y jacks on the back panel of the system to the corresponding
jacks on your TV.
Component
.......
(Better Quality)
METHOD 3
- Connect the HDMI out to the HDMI input on your TV.
HDMI
.......
(Best Quality)
METHOD 4
•
When the Progressive scan mode is selected, the VIDEO and S-VIDEO outputs do not feed any
signal.
Note
•
Ensure that the speakers are securely mounted on the wall. Insecure
installation may cause injuries or damages.
Note
HT-P50
TV
METHOD 2
METHOD 3
Green
Green
Blue
Blue
Red
Red
(supplied)
METHOD 1
METHOD 4
Installing Wall-Mounted Speakers
1
2
3
4
Fix two screws (not supplied) to the wall.
Mount front and rear speakers.
•
Center speakers cannot be mounted on the
wall.
Installation is complete.
Turn the speaker stand as illustrated.
Fit the speaker
hole into the screw
on the wall to hang
(mount) the speaker.
16
CONNECTIONS
