![Samsung HT-J7750W User Manual Download Page 10](http://html.mh-extra.com/html/samsung/ht-j7750w/ht-j7750w_user-manual_346811010.webp)
10
- English
Connections
Installing the Speakers on the Tallboy Stands
1.
Find the speaker cable that is attached to the Stand.
Turn the Stand and Stand Base upside-down, unravel
the speaker cable, and then draw it through the hole in
the Stand Base.
✎
Handle the Stand carefully. It is heavy.
2.
Connect the Stand Base to the bottom of the Stand.
3.
Insert three 5x20 screws into the marked holes in the
Stand Base, and then tighten them with a screwdriver as
shown in the illustration.
4.
Place the speaker cable into the slot on the bottom of
the stand base.
5.
Connect the assembled stand and a speaker together by
matching the labels on the stand and speaker with each
other as shown in the picture.
6.
Insert a screw (5x20) into the hole on the rear of the
speaker and tighten by turning it clockwise with a
screwdriver.
7.
Repeat steps 1 through 6 with the other speaker and
stand.
Speaker Cable Connections
1.
Match each speaker cable bundle to the correct speaker by matching the coloured band on each bundle
to the coloured sticker on the bottom or back of each speaker.
2.
Connect the speaker wire plugs from each speaker to the back of the product by matching the coloured
band on each cable to the colours of the speaker jacks. When connecting, make sure to match label
colour on the back of speaker.
SURROUND SPEAKERS OUT
52'#-'4+/2'�%'š
ID SET
L
R
HDMI OUT
1
SPEAKERS OUT
CENTER
SUBWOOFER
FRONT
L
FRONT
R
FRONT TOP
L
FRONT TOP
R
IMPEDANCE : 3
SPEAKERS OUT
CENTER
SUBWOOFER
FRONT
L
FRONT
R
FRONT TOP
L
FRONT TOP
R
IMPEDANCE : 3
Centre Speaker
Wireless Receiver Module
Surround Speaker (L)
Surround Speaker (R)
Front Top/
Front Speaker (L)
Front Top/
Front Speaker (R)
Subwoofer
1
3
5
6
4
Speaker
Stand
Stand Base
Stand
2
HT-J7750W-ZK-ENG-0311.indd 10
HT-J7750W-ZK-ENG-0311.indd 10
2015-03-11 3:38:24
2015-03-11 3:38:24