16
- English
Settings
Radio Setup
•
To listen to the radio, you must connect the
supplied FM antenna.
Operating the Radio with the Remote Control
1.
Press the
FUNCTION
button to select
FM
.
2.
Tune to the desired station.
•
Preset Tuning 1
: Press the
5
button to select
PRESET
, and then press the
TUNING UP
,
DOWN
button to select a preset station.
-
Before you can tune to preset stations, you
must add preset stations to the product's
memory.
•
Manual Tuning
: Press the
5
button to select
MANUAL
, and then press the
TUNING UP
,
DOWN
button to tune in to a lower or higher
frequency.
•
Automatic Tuning
: Press the
5
button to
select
MANUAL
, and then press and hold the
TUNING UP
,
DOWN
button for a few seconds
to automatically search the band.
Selecting Mono or Stereo
Press the
MO/ST
button.
•
Each time you press the button, the sound switches
between
STEREO
and
MONO
.
•
In a poor reception area, select
MONO
for a clear,
interference-free broadcast.
Presetting Stations
Example : Presetting FM 89.10 into memory.
1.
Press the
FUNCTION
button to select
FM
.
2.
Press the
TUNING UP
,
DOWN
button to scroll the
FM frequencies, and then select <89.10>.
3.
Press the
TUNER MEMORY
button (the yellow
C
button at the bottom of the remote).
4.
Press the
TUNER MEMORY
button again within
about 5 seconds. The station is stored in memory.
✎
If you press the
TUNER MEMORY
button
repeatedly without changing the station, the
inputted station may be overwritten.
5.
To preset another station, repeat steps 2 to 4.
•
To tune in to a preset station, press the
TUNING
UP
,
DOWN
button.
✎
To delete all Preset FM stations at once, press the
TITLE MENU
button for about 5 seconds in FM
Manual mode until
DEFAULT PRESET
appears
on the display.
Recording FM Radio
You can record your favorite radio broadcast on a USB
storage device.
1.
Insert a USB device into the USB jack on the front
of the product.
2.
Press the
FUNCTION
button to select
FM
, and
then press the
TUNING UP
,
DOWN
button to
select the station you want to record.
3.
Press the
RED (A)
button to start recording. The
recording process begins.
•
The recorded time is displayed on the left and
the recording time still available, based on the
amount of free space in the USB storage device,
is displayed on the right.
4.
Press the
EXIT
button to finish your recording. The
recording is stopped and saved as an .mp3 file at
the same time. To play the recorded file, refer to
"Playing Files on a USB Device".
✎
The recorded file is saved in the
Tuner
folder which
is created automatically.
✎
Only the
(OPEN/CLOSE),
(POWER),
EXIT
,
MUTE
, and
/
-
, buttons are operable
while FM radio is being recorded.
✎
If you don't press any buttons while recording, the
screen saver will be enabled.
✎
Sound effects, such as DSP, EQ, etc., are not
recorded during FM radio recording.
✎
The radio is recorded at a set, default volume
even if you change the volume or press the
MUTE
button during the recording process.
✎
If you remove the USB device or Power Cable
during the recording process, the portion of the
file which has already been recorded may not play
back.
HT-J4100_ZC-0206.indd 16
HT-J4100_ZC-0206.indd 16
2015-02-06 7:03:05
2015-02-06 7:03:05
