20
- English
Settings
✎
You can get the Network parameter values
from your Internet provider.
11.
When finished, select
Return
(
'
), and then
press the
E
button. The
Security Key
screen
appears.
12.
On the
Security Key
screen, enter your
network's Security Code or Pass Phrase. Enter
numbers directly using the number buttons on
your remote control. Enter letters by selecting
a letter with the ▲▼◀▶ buttons, and then
pressing the
E
button.
13.
When finished, select
Done
at the right of the
screen, and then press the
E
button. The
product verifies the network connection and
then connects to the network.
14.
After the home theater verifies the network,
select
OK
, and then press the
E
button.
✎
You can also begin the Manual Network setup
by going to
Settings > Network > Network
Status
.
WPS(PBC)
One of the easiest ways to set up the wireless
network connection is using the
WPS(PBC)
function.
If your wireless router has a
WPS(PBC)
button,
follow these steps:
Follow the Steps 1 to 3 in "Configuring Your
Network Connection". (See page 18)
1.
In the
Network Settings
screen, change
Network Type
to
Wireless
. The product searches
for and then displays a list of the available
networks.
2.
Scroll the list down, select
WPS(PBC)
, and then
press the
E
button.
3.
Press the
WPS(PBC)
button on your router
within two minutes. Your product automatically
acquires all the network settings values it
needs and connects to your network after the
network connection is verified.
4.
When it is done, highlight
OK
, and then press
the
E
button.
✎
For a WPS connection, set your wireless
router’s security encryption to AES. WEP
security encryption does not support a WPS
connection.
Wi-Fi Direct
The
Wi-Fi Direct
function allows you to connect
Wi-
Fi Direct
devices to the product and each other using
a peer-to-peer network, without a wireless router.
✎
Some
Wi-Fi Direct
devices may not support
the DLNA function if connected via
Wi-Fi
Direct
. If this is the case, change the network
connection method you used to connect the
device to the home theater.
✎
Wi-Fi Direct
transmissions can interfere
with Bluetooth signals. Before you use the
Bluetooth
function, we strongly recommend
that you turn off the
Wi-Fi Direct
function on
any device in which it is currently on.
1.
Turn on the
Wi-Fi Direct
device and activate its
Wi-Fi Direct
function.
2.
In the Home screen, select
Settings
, and then
press the
E
button.
3.
Select
Network
, and then press the
E
button.
4.
Select
Wi-Fi Direct
, and then press the
E
button.
The
Wi-Fi Direct
devices that you can connect
to appear.
Settings
Display
Audio
Network
System
Language
Security
General
Support
Wi-Fi Direct
Device Name : HT-HM55
Select your Wi-Fi Direct device to connect to.
AndroidXXXXXXX
Not Connected
Close
Refresh
5.
You have three ways to complete the Wi-Fi
connection:
●
Through the Wi-Fi device.
●
Through the product using PBC.
●
Through the product using a PIN.
Each is covered below.
Through the Wi-Fi Device
1.
On the Wi-Fi device, follow the device's
procedure for connecting to another
Wi-Fi
Direct
device. See the device's user manual for
instructions.
