|
22
English
Settings
Manual
If you have a static IP address or the Automatic
procedure does not work, you’ll need to set the Network
Settings values manually.
Settings
Display
Audio
Network
System
Language
Security
General
Support
Wired Network Settings
Internet Protocol Setup : Manual
IP Address
: 0 0 0 0
Subnet Mask
: 255 255 255 0
Gateway :
0 0 0 0
DNS
:
Manual
DNS Server
: 0 0 0 0
>
Move
"
Select
'
Return
1.
Follow the first four steps in the Automatic
procedure, but select
Manual
instead of Auto in
Step 4.
2.
Press the
▼
button to go to the first entry field (IP
Address).
3.
Use the number buttons on your remote to enter
numbers.
4.
When done with each field, use the ► button to
move successively to the next field.
You can also use the other arrow buttons to move
up, down, and back.
5.
Enter the
IP Address
,
Subnet Mask
, and
Gateway
values.
6.
Press the ▼ button to go to
DNS
.
7.
Press the ▼ button to go to the first DNS entry field.
Enter the numbers as above.
8.
Press the
RETURN
(
'
)
button on your remote.
9.
Select
Network Test
, and then press
E
. When
the test is completed, press
RETURN
(
'
)
button to
exit to the previous screen.
10.
Select
Network Status
, and then press
E
.
11.
The Network Status screen appears.
The product verifies the network connection and
then connects to the network. When it is done,
highlight
OK
, and then press
E
.
Upgrading Software
The Software Upgrade menu allows you to upgrade the
product’s software for performance improvements or
additional services.
• Never turn the product off or back on manually
during the update process.
1.
In the Home menu, select
Settings
, and then press
the
E
button.
2.
Select
Support
, and then press the
E
button.
3.
Select
Software Upgrade
, and then press the
E
button.
4.
Select one of the following methods:
•
By Online
•
By USB
•
Auto Upgrade Notification
5.
Press the
E
button.
Directions for each method begin below.
| NOTES |
The update is complete when the product turns off
after restarting. Press the
POWER
button to turn
on the updated product for your use. Never turn the
product on or off manually during the update process.
Samsung Electronics takes no legal responsibility for
product malfunction caused by an unstable Internet
connection or consumer negligence during a software
upgrade.
If you want to cancel the upgrade while the upgrade
software is downloading, press the
E
button.
By Online
Your product must be connected to the Internet to use
the By Online function. Remove all discs before you
begin.
1.
Select
By Online
, and then press the
E
button.
The Connecting to Server message appears.
2.
If an update is available, a popup message appears
asking if you want to upgrade. If you select Yes, the
product turns off automatically, turns on, and then
begins the upgrade.
| IMPORTANT |
Never turn the home cinema on or off manually during
a software upgrade.
3.
The update progress popup appears. When
the update is completed, the product turns off
automatically again.
4.
Press the
POWER
button to turn on the product.
| NOTES |
The update is complete when the product turns off
after restarting. Press the
POWER
button to turn on
the updated product for your use.
Never turn the product off or on manually during the
update process.
Samsung Electronics takes no legal responsibility for
a product malfunction caused by an unstable internet
connection or consumer negligence during software
upgrade.
HT-F4500_F4530H_F4550_XP_ENG_131223.indd 22
HT-F4500_F4530H_F4550_XP_ENG_131223.indd 22
2013-12-23 2:28:58
2013-12-23 2:28:58
