English
21
|
04
Settings
Security
The default PIN is 0000. Enter the default PIN to access
the security function if you haven't created your own
PIN.
BD Parental
Rating
Prevents playback of Blu-ray Discs
with a rating equal to or above a
specific age ratings unless the PIN is
entered.
DVD Parental
Rating
Prevents playback of DVDs with a
rating above a specific
numerical ratings unless the PIN is
entered.
Change PIN
Change the 4-digit PIN used to
access security functions.
General
Time Zone
You can specify the time zone that is
applicable to your area.
Support
Software
Upgrade
For more information about the
Software Upgrade function, see
"Upgrading Software" on page 22.
Contact
Samsung
Provides contact information for
assistance with your product.
Terms of
Service
Agreement
View the general disclaimer regarding
third party contents and services.
Reset
All settings will revert to the default
except for the network settings. The
default security password is 0000.
Networks and the Internet
When you connect this product to a network, you can
use network based applications and functions such as
BD-LIVE and upgrade the product's software through the
network connection.
Configuring Your Network Connection
Before you begin, contact your ISP to find out if your
IP address is static or dynamic. If it is dynamic, we
recommend you use the Automatic procedure below. If it
is static, you must use the Manual procedure that follows.
• Before you begin, confirm that the product is
connected to your router with a network cable.
Automatic
To start the configuration process, follow these steps:
1.
In the Home menu, select
Settings
, and then press
the
E
button.
2.
Select
Network
, and then press the
E
button.
3.
Select
Wired Network Settings
, and then press
the
E
button.
The Wired Network Settings screen appears.
4.
Press the
►
button on the Internet Protocol Setup
menu.
Use
▲▼
button to select
Auto
, and then press the
E
button.
Settings
Display
Audio
Network
System
Language
Security
General
Support
Wired Network Settings
Internet Protocol Setup : Auto
IP Address
: 0 0 0 0
Subnet Mask
: 0 0 0 0
Gateway :
0 0 0 0
DNS
:
Auto
DNS Server
: 0 0 0 0
>
Move
"
Select
'
Return
5.
The Network function acquires and fills in the values
for IP Address, Subnet Mask, etc., automatically.
6.
After the Network function has acquired the network
values, press the
RETURN
(
'
)
button.
7.
Select Network Test, and then press
E
. The home
cinema validates the network connection. When it is
done, press the
RETURN
(
'
)
button.
HT-F4500_F4530H_F4550_XP_ENG_131223.indd 21
HT-F4500_F4530H_F4550_XP_ENG_131223.indd 21
2013-12-23 2:28:53
2013-12-23 2:28:53
