Speaker Assembly Method
The speakers can be installed on stands or a wall, depending whether the RRSS or SDSM speaker
installation configuration is used.
Read the following instructions on speaker assembly carefully and install the speakers correctly.
Check the components before assembling and installing the speakers.
Front Speaker (2EA)
Rear Speaker (2EA)
Center Speaker
Front Stand (2EA)
Rear Stand (2EA)
Front Speaker Cover (2EA)
Subwoofer
Speaker Components
Brackets (2EA)
Speaker wires (6EA)
Screws (2EA)
Speaker Accessories
•
If you install it the rear speaker on the front speaker, you can adjust the rear speaker's angle by rotat-
ing it 30° to the right or left.
Note
12
11
CONNECTIONS
•
It is recommended to connect the speaker line at the rear of front stand when you install it in stand
type. (The sound is output same if you connect to the rear of front speaker.)
Note
Installing speakers in the RRSS
(Rear Reflecting Surround System)
Configuration using stands
Installing speakers on Front stands
Follow the instructions and install the
speaker as shown below.
Install the front
speaker on the front
stand.
1
Front Speaker
Front Stand
Turn the screw on the
rear of front speaker
to fasten it.
2
Phillips
Screwdriver
Install the rear speak-
er on the front speak-
er.
3
Rear Speaker
Front Speaker
Connect the
rear speaker
wire and front
speaker wire on
the rear of front
stand.
4
Rear Speaker wire
Front Speaker wire
