English
63
04
Basic Functions
How to Link the Wireless Transmitter
with the Main Unit
Turn off your Home Cinema.
Press the
4
,
7
,
6
,
3
buttons on the remote
control in order.
The Power LED will blink once.
Connect the iPod/iPhone to the Wireless
transmitter.
STA
ND
BY
LIN
K
CH
AR
GE
Turn on the iPod/iPhone. Press the "
ID SET
"
button on the back of the Wireless
transmitter for 5 seconds. The link light on
the wireless transmitter will blink fast.
Turn on your product.
To listen to music from iPod/iPhone over the
product, press the
FUNC.
button on the
product to select "
iPod
" mode.
After you select "
iPod
" mode, turn the
volume of the product down to avoid hearing
damage.
You can control the speaker volume of iPod/
iPhone with a volume wheel or a volume bar.
When iPod/iPhone is stopped or in a power
saving mode, a Wireless transmitter is turned
to the Sleep Mode.
When iPod/iPhone is turned to the Deep
Sleep Mode, the Wireless transmitter is off.
1.
2.
•
3.
4.
5.
•
•
•
•
Operation status of the wireless
transmitter's LED
CH
AR
GE
STANDB
Y
LIN
K
STANDB
Y
LINK
Display
Function
LINK
(Blue LED)
STANDBY
(Red LED)
LED ON
Pairing
successfully
completed
STANDBY
LED BLINK
(Long blink)
Processing iPod/
iPhone
LOW BATTERY
LED BLINK
(Short blink)
Processing
pairing
Pairing failed
CAUTION
If you use the main unit nearby a wireless
device such as a laptop computer, an AP, or
Wifi , any unstable operation error can happen.
Do not pairing the SWA-5000 and iPod/iPhone
at the same time. If you pairing at the same
time, iPod/iPhone and SWA-5000 may not
connect to the product.
The transmission distance from the product to
the wireless transmitter is about 5m, but may
vary depending on your operation
environment.
The audio signal may be weakened or even
lost where there exists an obstacle such as a
wall or partition between the product and
wireless transmitter or if you move around
carrying the wireless transmitter.
!
HT-C9950W_ELS_0914.indd 63
HT-C9950W_ELS_0914.indd 63
2010-09-14 6:55:43
2010-09-14 6:55:43