62
English
Basic Functions
Use iPod/iPhone with a Wireless Dock
Cradle for iPod/iPhone
You can enjoy fi ner quality of music through the
speaker by sending iPod/iPhone’s audio signal
using a Wireless Transmitter.
The Wireless Transmitter's linking ID is preset at
the factory and the main unit and Wireless
Transmitter should link (connect wirelessly)
automatically when main unit is turned on. If the
link indicator does not light when main unit and
Wireless Transmitter are turned on, ID setting
must be made manually. (See page 63)
Turn on the main unit and connect the iPod/
iPhone to the Wireless transmitter.
Then press the
FUNC.
button on the product to
select "
iPod
" mode.
The
FUNC.
mode of the main unit will switches
as follows. Repeatedly press
BD/DVD
D.IN
AUX
iPod
HDMI 1
HDMI 2
TUNER
(See page 14)
How to charge the Wireless Transmitter
STA
ND
BY
LIN
K
CH
AR
GE
CHARGE
STANDB
Y
Connect the Wireless Transmitter to the
Charging Cradle.
Connect the DC power adaptor to a wall
socket.
The charging indicator lights up and charging
starts. After the battery is fully charged, the
charging indicator turns Green.
Operation status of the charging cradle's LED
Display
Function
GREEN LED ON
Power on /Charging
completed
RED LED ON
Charging.
1.
2.
•
NOTE
The indication is the charging state of the built-
in battery in iPod main Dock.
Check the charging state of iPod/iPhone by
checking the charging indication of its battery.
CAUTION
The Wireless Transmitter can be only
charghed by the supplied adaptor.
iPod/iPhone models that can be used
with this product
iPod touch (3rd generation)
iPod touch (2nd generation)
iPod touch (1st generation)
iPod classic
iPod with video
iPod with dock connector
iPod with Click Wheel
iPod nano (5th generation)
iPod nano (4th generation)
iPod nano (3rd generation)
iPod nano (2nd generation)
iPod nano (1st generation)
iPhone 3GS
iPhone 3G
iPhone
NOTE
“Made for iPod” means
that an electronic
accessory has been
designed to connect specifi cally to iPod and has
been certifi ed by the developer to meet Apple
performance standards.
“Made for iPhone” means that an electronic
accessory has been designed to connect
specifi cally to iPhone and has been certifi ed by
the developer to meet Apple performance
standards.
Apple is not responsible for the operation of this
device or its compliance with safety and
regulatory standards.
The volume control may not be operated normally
except at the referred models. If there is any error
happened at the models above, please update
the software of iPod/iPhone at the lastest version.
✎
!
✎
HT-C9950W_ELS_0914.indd 62
HT-C9950W_ELS_0914.indd 62
2010-09-14 6:55:42
2010-09-14 6:55:42
