Samsung HT-C345, User Manual

Page: 24 / 39

English
Setup
English
Delay Time
If the speakers cannot be placed at equal distances from
the listening position, you can adjust the delay time of
the audio signals from the Centre and Rear speakers.
You can also set the Test Tone in this mode.
Setting up the Speaker Delay Time
When 5.1CH Surround Sound is played, you can
enjoy the best sound if the distance between you
and each speaker is the same.
Since the sounds arrive at the listening position at
different times depending on the placement of
speakers, you can adjust this difference by adding a
delay effect to the Center and Rear Speakers.
Settings
Move Select Return
Delay Time
Front
Center : 00mSEC
Rear : 10mSEC
Subwoofer
Test Tone : OFF
Change Select Return
NOTE
The Delay Time menu will be activated only when the
5.1 channel source is played.
You can not set Centre and Rear in this mode when
their Speaker Size is set to None.
Ideal Centre
Speaker placement
Df: The distance from Front Speaker
Dc: The distance from Centre Speaker
Dr: The distance from Rear Speaker
Place all speakers within this circle.
Ideal Rear
Speaker placement
✎
`
`
Setting the Centre Speaker
If the distance of Dc is equal to or longer than the
distance of Df in the figure, set the mode as 0ms.
Otherwise, change the setting according to the table.
Distance
between
Df and Dc
0.00m 0.34m 0.68m 1.06m 1.40m 1.76m
Delay
Time
00 ms 01 ms 02 ms 03 ms 04 ms 05 ms
Setting the Rear Speaker
If the distance of Dc is equal to or longer than the
distance of Dr in the figure, set the mode as 0ms.
Otherwise, change the setting according to the table.
Distance
between
Dr and Dc
0.00m 1.06m 2.11m 3.16m 3.62m 5.29m
Delay
Time
00 ms 03 ms 06 ms 09 ms 12 ms 15 ms
NOTE
With PL II (Dolby Pro Logic II), the delay time
may be different for each mode.
With AC-3, the delay time can be set between 00
and 15mSEC.
The Centre channel is only adjustable on 5.1
channel discs.
Test Tone
Settings
Move Select Return
Speaker Setting
Speaker Size
Sound Edit
Delay Time
Test Tone : On
▶
Select Return
Use the Test Tone feature to check the speaker
connections.
Press the
_+
buttons to select ON .
The test tone will be sent to Front Left
➞
Center
➞
Front Right
➞
Rear Right
➞
Rear Left
➞
Subwoofer in order.
To stop the test tone, press the ENTER button.
✎
`
`
`
~
~