English - 34
Changing the Position of the PIP Window
4
Press the ▲ or ▼ button to select
Position
, then press the
ENTER
button. Press
the ▲ or ▼ button to select the desired PIP window position, then press the
ENTER
button.
➢
In Double Window ( ) and Double Wide ( ) modes, Position cannot be
selected.
➢
If the PIP window is set to Double Window ( ) or Double Wide ( )
mode, the screen size or alignment may slightly differ depending on the signal
type.
Changing the PIP Channel
5
Press the ▲ or ▼ button to select
Channel
, then press the
ENTER
button. Press
the ▲ or ▼ button at the bottom of the remote to select the desired channel in the
PIP window, then press the
ENTER
button.
➢
The channel can be active when the sub picture is set to TV.
Press the
EXIT
button to exit.
Press the
PIP CH
and
CH
and buttons on the remote control to change the PIP
channel.
Freezing the Current Picture
1
Press the
STILL
button to freeze a moving picture.
➢
Normal sound will still be heard. Press again to cancel.
➢
To prevent screen burn-in, this function will automatically cancel after 5
minutes.
➢
While V-Chip is in operation, the Still function cannot be used.
PIP
: On
Size
:
Position
:
Channel
: DTV Air 3 - 0
PIP
T V
Enter
Move
Return
PIP
: On
Size
:
Position
:
Channel
: DTV Air 3 - 0
PIP
T V
DTV Air 3 - 0
▲
▲
Enter
Move
Return
���
�����
��
���
�����
��
BN68-01192A_Eng-1.indd 34
2007-04-30 ｿﾀﾀ・10:15:11
