Samsung HMX-R10BN Page 31 User Manual Download

Page: 31 / 157

Charging the battery pack with the AC power adaptor

• The battery pack is not charged during the power saving mode, which may keep the

mode indicator on or flashing. Start charging the battery after turning off the camcorder

by pressing the power (

) button.

• Even with the power is switched off, battery pack will still discharge if the battery pack is

left inserted in the camcorder.

• It is recommended you to have one or more additional battery packs to allow continuous

use of your camcorder.

PRECHECK!

Before starting the following procedure, make sure that the battery pack is inserted in your camcorder.

Press the power(

) button to turn off the camcorder and then close the LCD

screen.



page 31

Connect the power cord to the AC Adaptor and the wall outlet.

Connect the AC Adaptor to the DC IN jack on the camcorder.
• The CHG(charge) lamp lights up and charging starts. After the battery is fully

charged, the charging(CHG) lamp turns green.

DC IN

Power cord

AC adaptor

Power(

) button

Summary of Contents for HMX-R10BN






























































































































































Search results

Summary of Contents for HMX-R10BN

Reviews:

Related manuals for HMX-R10BN

Brands by name

Popular brands

Samsung HMX-R10BN, User Manual

Search results

Summary of Contents for HMX-R10BN

Reviews:

Related manuals for HMX-R10BN

Brands by name

Popular brands