Samsung HMX-QF30 Page 125 User Manual Download

Page: 125 / 133

121

Appendixes

Maintenance

Cautions when storing

• To protect your camcorder safely, turn it off.

- Remove the battery.
- Remove the memory card.

Cleaning the camcorder

Before cleaning, turn off the camcorder and remove the battery.

•

To clean the exterior

- Wipe gently with a soft, dry cloth. Do not apply excessive force

when cleaning. Gently rub the surface.

Do not use benzene or thinner to clean the camcorder. The exterior
coating could peel off or the case could deteriorate.

•

To clean the LCD screen

Wipe very gently with a soft, dry cloth. Be careful not to damage the

screen.

•

To clean the lens

Use a blower brush to remove dust, and then wipe the lens gently

with a soft cloth.

If necessary, wipe gently with lens paper or tissue.

- Mold may form if the lens is left dirty.
- If the lens looks dim, turn off the camcorder and leave it off for

about 1 hour.

Summary of Contents for HMX-QF30






































































































































Search results

Summary of Contents for HMX-QF30

Reviews:

Related manuals for HMX-QF30

Brands by name

Popular brands

Samsung HMX-QF30, User Manual

Search results

Summary of Contents for HMX-QF30

Reviews:

Related manuals for HMX-QF30

Brands by name

Popular brands