Samsung HMX-QF30 User Manual Download

Page: 113 / 133

109

Appendixes

Troubleshooting

Warning icons and messages

Problems may occur because of the following reasons. Check the information and take corrective action.

Battery

Message

Icon

Informs that...

Action

Low Battery

The battery is almost discharged.

• Replace with a charged battery or connect the AC

power adaptor.

Check authenticity
of the battery.

The battery cannot pass authenticity check.

• Check whether the battery is authentic. If not,

change to an authentic Samsung battery.

• We recommend you use only genuine Samsung

batteries in this camcorder.

Storage media

Message

Icon

Informs that...

Action

Insert Card

There is no memory card inserted in the memory card
slot.

• Insert a memory card.

Card Full

There is not enough space to record on the memory
card.

• Delete unnecessary files from the memory card.
• Back-up files to a PC or another storage media,

and then delete unneeded files.

• Replace the memory card with another card that

has enough free space.

Card Locked

The write protection tab on an SD or SDHC card has
been set to lock.

• Release the write protection tab.

Before contacting a Samsung authorized service center, perform the following simple checks.
They may save you the time and expense of an unnecessary call.

Summary of Contents for HMX-QF30






































































































































Search results

Summary of Contents for HMX-QF30

Reviews:

Related manuals for HMX-QF30

Brands by name

Popular brands

Samsung HMX-QF30, User Manual

Search results

Summary of Contents for HMX-QF30

Reviews:

Related manuals for HMX-QF30

Brands by name

Popular brands