Samsung HMX-QF30 Page 117 User Manual Download

Page: 117 / 133

Troubleshooting

113

Appendixes

Wireless Network

Message

Icon

Informs that...

Action

Connection failed.

The camcorder’s WLAN configuration does not match
that of the AP. Or it has failed to connect to a device.

• Configure the IP settings (auto or manual) of your

camcorder to match the AP’s.

• Try connecting to the device again.

No response from
server.

No renderer that can be connected to the camcorder
is found in the connected network.

• Check your network connection.

Device
disconnected.

Network connection disconnected while transferring
videos or photos.

• Select the device and try connecting again.

Initializing Failed.

The camcorder has failed to locate a TV Link enabled
device.

• Turn on TV Link enabled devices on the network.

Transfer failed.

The camcorder has failed to send videos or photos to
a TV Link device or a smart phone.

• Check the network connection and try again.

Summary of Contents for HMX-QF30






































































































































Search results

Summary of Contents for HMX-QF30

Reviews:

Related manuals for HMX-QF30

Brands by name

Popular brands

Samsung HMX-QF30, User Manual

Search results

Summary of Contents for HMX-QF30

Reviews:

Related manuals for HMX-QF30

Brands by name

Popular brands