Samsung HMX-M20 User Manual Download Page 44

Page: 44 / 147

BASIC CAMCORDER POSITIONING

Use both hands while taking a video or picture to prevent the camcorder from shaking.
Try to avoid any slight movement while shooting.

Adjusting the shooting angle

The camcorder’s lens angle is approximately 25˚ higher than the rest of the camcorder body. Make
sure you angle the camcorder accordingly for proper shooting.

• We recommend that you keep the sun behind you while shooting.
• To avoid underexposing a backlit subject when taking a photo, please use the ﬂash.

getting ready to start recording

Aim the camcorder as shown in the illustration.

Hold the camcorder with both your hands.

Put your hand through the hand strap.

Make sure your footing is stable and there is
no danger of colliding with another person or
object.

Aim and focus as shown in the illustration.

INTELLI

ZOOM

PIX

f=6.8-34mm F:3.5

chneider

E U

Z NAC H

INTELL

Summary of Contents for HMX-M20




















































































































































Search results

Summary of Contents for HMX-M20

Reviews:

Related manuals for HMX-M20

Brands by name

Popular brands

Samsung HMX-M20, User Manual

Search results

Summary of Contents for HMX-M20

Reviews:

Related manuals for HMX-M20

Brands by name

Popular brands