Samsung HMX-M20 User Manual Download Page 39

Page: 39 / 147

OPEN

Open the battery/memory card cover by
sliding the battery/memory card cover
switch towards

①

Insert the memory card into the card slot
until it softly clicks.
• Make sure that SD/SDHC Card logo is

facing up and the camcorder is placed
as shown in the ﬁgure.

Close the battery/memory card cover by
sliding the battery/memory card cover
switch in the direction of

②

Open the battery/memory card cover by
sliding the battery/memory card cover
switch towards

①

Gently push the memory card to eject it.

Close the battery/memory card cover by
sliding the battery/memory card cover
switch towards

②

getting ready to start recording

INSERTING AND REMOVING A MEMORY CARD (NOT SUPPLIED)

Your camcorder supports only SD (Secure Digital) and SDHC (Secure Digital High Capacity) cards.
Card compatibility with the camcorder may vary depending on the manufacturer and the type of
memory card.

• To avoid data loss, turn off the camcorder by pressing the power (

) button for one second

before inserting or ejecting the memory card.

• Do not format the memory card on a PC.
• Do not remove the power supply (battery pack or AC adaptor) during operations such as recording,

playback, formatting, deleting, and editing. Doing so may damage the storage media or data.

• Do not eject a memory card when it is in operation. Doing so may damage the memory card or

data.

• Be careful not to push the memory card too hard. The memory card may suddenly pop out.

To insert a memory card

To eject a memory card

❷

❶

Summary of Contents for HMX-M20




















































































































































Search results

Summary of Contents for HMX-M20

Reviews:

Related manuals for HMX-M20

Brands by name

Popular brands

Samsung HMX-M20, User Manual

Search results

Summary of Contents for HMX-M20

Reviews:

Related manuals for HMX-M20

Brands by name

Popular brands