manualshive.com logo in svg

Samsung HLS5087WX/XAA, Service Manual

Share
Download
Samsung HLS5087WX/XAA Service Manual Download Page 43

Alignment & Adjustment

Samsung Electronics

3-27

3-6-2 Align the Focus

1. Remove the 2 screws.

: TH,B,M4.L15,BLK,SWRCH18A

2. Pull out the holder Chassis 

3. Adjust the Lens Focus

4. Adjust the Lens focus.

ccw

cw

Focus Alignment

1) Input a Crosshatch pattern or enter service mode and use the 

internal generated patterns.

2) Insert your hand/finger into the unit as shown in the figure

and adjust the focus alignment dial of the Projection Lens  
Clockwise or Counter Clockwise (See picture in step 4) until 
the picture is clear.

3) Since the alignment is done from the rear, use a mirror or a 

second person to confirm the adjustment is complete.

※

When one person works, do the following:

1) Remove the side-cover of the cabinet side.
2) See the screen through the hole on the side and adjust 

the focus.

www.fieldtechsource.net

Summary of Contents for HLS5087WX/XAA







































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands