manualshive.com logo in svg

Samsung HLS5087WX/XAA, Service Manual

Share
Download
Samsung HLS5087WX/XAA Service Manual Download Page 116

Operation Instruction & Installation

11-2

Samsung Electronics

11-1-3 Front Panel LED Indicators

The three lights on the front panel indicate the status of your TV.

Remote Control Sensor
Aim the remote control towards this spot on the TV.

POWER
Press to turn the TV on and off.

Indicator Light Key

• It takes about 30 seconds for the TV to warm up, so normal brightness may not appear immediately.
• The TV has a fan to keep the inside lamp from overheating. You'll occasionally hear it working.

Indicator Light Key

●

: Light is On

◑

: Light is Blinking

○

: Light is Off

TIMER

LAMP

STAND BY/TEMP

Indication

○

○

●

Standby state.

○

◑

○

The picture will automatically appear in about 15 seconds.

●

◑

○

Auto Timer ON/OFF has been set and the set will automatically be turned on in about
15 seconds.

◑

○

◑

A cooling fan inside the set is not operating normally.

○

◑

◑

Lamp cover on the rear of the set is not properly shut.

○

○

◑

Check if the ventilation hole on the rear of the set is blocked, because if the inner
temperature is too high, the power will shut off.

◑

◑

◑

Lamp may be defective. Please contact a certified technician.

www.fieldtechsource.net

Summary of Contents for HLS5087WX/XAA







































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands