Troubleshooting
Samsung Electronics
4-25
■ ACTUATOR GAIN Adjustment
1. Before Adjustment
1) Turn off the power to put the unit into the STAND-BY mode.
2) In order to enter the Service Mode, press
MUTE
1
8
2
POWER
button on the remote
control.
3) Select “Service” on the first display of the Service mode menu.
4) Press the
▲ ▼
(Up or Down) button to move to ACTUATOR GAIN [Patt 1], ACTUATOR GAIN [Patt 2], then press ENTER to
select.
5) The Actuator gain setup screen will be displayed.
6) Press the
◀▶
(Left of Right) button to adjust. check the smooth picture at it’s minimum and maximum values of changing,
then adjust to the mean value.
- ACTUATOR GAIN [Patt 1], ACTUATOR GAIN [Patt 2]
2. Making Adjustments
1) As shown in the picture above, change the actuator values to eliminate saw tooth shapes.
- To fine tune, increase the data value ensuring that you get the center between the starting and ending points of the
disappearing saw tooth shape.
Actuator Gain
40
Before Adjusting After Adjusting
- ACTUATOR GAIN[Patt 1],ACTUATOR GAIN[Patt 2]
Summary of Contents for HL61A750A1F
Page 8: ...MEMO 1 6 Samsung Electronics ...
Page 70: ...MEMO 5 7 Samsung Electronics ...