30
English
Hotel TV Function
Description
Category
Item
REACH
Solution
REACH RF Mode
You can turn on or off the REACH RF Mode
. When set to
On, the TV can operate with the REACH
Server (Modulator)
through the RF channel (DTV cable).
REACH IP Mode
You can turn on or off the REACH IP Mode
. When set to
On, the TV can operate with the REACH IP
Server through the IP network.
Server URL Setting
You can enter the REACH IP Server
's address. (Example: http://192.168.1.2:443
)
REACH Channel
This is a
DTV Cable Channel PTC Number
for receiving REACH Data when the REACH RF Mode is
on. The value must be same as the value set on the
REACH Server (Modulator).
Group ID
You can set the TV's Group ID to manage TVs in groups on the REACH Server (Modulator).
REACH Update Time
You can set the specific time to receive and update
REACH Data from the REACH Server
(Modulator). (Operates when the AC power cord is plugged in and the power is off.)
y
OFF: You can turn off the REACH Update Time function.
y
1hour: 1 hour after the TV's power is off
y
2hours: 2 hours after the TV's power is off
y
12:00 am: 12:00 am
y
2:00 am: 2:00 am everyday
y
12:00 pm: 12:00 pm everyday
y
2:00 pm: 2:00 pm everyday
REACH Update
Immediate
When set to
On, the TV will receive and update REACH Data from the REACH Server (Modulator)
right after the power is off. (Operates when the AC power cord is plugged in and the power is off.)
REACH Config Version
Displays the
TV Configuration Data
version received from the REACH Server.
H.Browser
Solution
H.Browser Mode
You can turn on or off the H.Browser Mode and run the
H.Browser Web App
.
URL Launcher Setting
H.Browser Solution settings menu
y
Install Web App
: Enter the H.Browser Server URL where
Web App
and
sssp_config.xml files are
located.
y
Uninstall: You can delete the installed
Web App
.
y
Timeout setting: Set the timeout period for connecting to the URL.
y
Developer Mode: If you used
Tizen Studio (SDK)
for development, you can connect to the Host
PC (which SDK is installed) to use the development tool.
HMS
HMS Mode
You can turn on or off the HMS Mode
. When set to
On, the TV can operate with the HMS Server
through the IP network.
HMS Server URL
Setting
You can enter the HMS Server
's address. (Example: http://192.168.1.2:8080
)
HMS Gateway Role
When there is one TV per room, set to '
Master'.
When there are more than one TVs per room, set the main TV to '
Master' and the others to
'Slave'.
HMS HalfTicker Display
Set to On if you want to use the HalfTicker UI.
When set to
Off, the HalfTicker UI
will not be displayed. However, all the hot keys (except for
Room Control key) on the HMS remote control will work normally without the HalfTicker UI
display.
Virtual
Standby
Virtual Standby Mode
When the AC power cord is plugged in and the power is off, this option maintains the TV's
important features even after the screen is off.
–
Electricity consumption may vary depending on the environment.
Reboot Time
After the TV power is off (in
Virtual Standby Mode
) if there is no input from the user within the
set
Reboot Time, the TV will reboot and enter Virtual Standby Mode
again.
Room Number
Room Number
You can set the room number of the TV's location.
✎
Refer to the manual of each solution for details about functions and settings of the solutions such as
REACH, HMS,
and H.Browser.
✎
REACH (Remote Enhanced Active Control for Hospitality) is a professional, interactive remote controller that lets
you deliver TV firmware updates, cloning data, channel mapping changes, REACH contents, and TICKER contents
through RF/IP DTV to several hundred hospitality TVs simultaneously. The REACH functions are available only
in standalone mode. The REACH Server is sold separately. Refer to the REACH server manual enclosed with the
REACH server product for more operating information.
