25
English
Hotel TV Function
Description
Category
Item
REACH
Solution
REACH
y
ON: The feature of REACH in this TV becomes available.
y
OFF: The feature of REACH in this TV becomes not available.
REACH IP Mode
If enabled, Reach will work over IP instead of RF.
Server IP Setting
The URL of the Reach IP server, for example https:\\192.168.1.2:443.
REACH Channel
Assign a DTV channel number to carry the update REACH data. This channel number must be the
same as the number set on the Reach server.
REACH Update Time
Lets you set when data such as updated SW, cloning files, and S-LYNC REACH contents is
downloaded from the REACH server to the TV :
y
1hour: Every hour
y
2hour: Every 2 hours
y
12:00 am: every 12:00 a.m.
y
2:00 am: every 2:00 a.m.
y
12:00 pm: every 12:00 p.m.
y
2:00 pm: every 2:00 p.m.
REACH Update
Immediate
y
ON: Whenever the TV enters standby mode (the power cord is plugged in and the power is off),
the REACH data is updated on the TV.
y
OFF: The REACH data is only updated on the TV at the REACH server update time.
Group ID
Select the group ID of the REACH server. (Refer to the REACH server manual for more details)
Room Number
Set the room number
IPG Room Type
Selects the IPG room type of the REACH server. (Refer to the REACH server manual for the more
information.)
REACH Config Version
The version of REACH is displayed.
Network
Network Setup
If this item is entered into, network setup menu is displayed. The network setup menu is used
for setting network like access internet.
Soft AP: Using this function, you can connect the TV on your mobile devices. Set the options for
connection of Wi-Fi device.
y
Soft AP: Turns on or off the Soft AP. When Soft AP is set to On, your mobile devices can find the
TV name in Wi-Fi connection list.
y
Security key: Set a security key that you need to enter on other devices so they can connect to
the TV.
–
Input the generated security key into the device you want to connect.
–
If network does not operate normally,check the security key again. An incorrect
security key may cause a malfunction.
✎
Soft AP may not be available if it is not supported by the model.
✎
Maximum number of devices that can be connected: 4 devices.
✎
Bitrate : 10 Mbps/device.
✎
The specifications above are based on our in-house testing. Actual performance may vary
depending on your wired/wireless network environment.
SmartHub Model
Setting
Set SmartHub Model.
SmartHub Setting
Set up SmartHub.
Service Discovery
Can use this feature to enable Service Discovery Features like DLNA.
VLAN ID
Create separate VLAN groups. A 3-digit number can be entered between 1 and 255 for the VLAN
ID.
Solution VLAN ID
When VLAN is used, set a VLAN ID to be assigned to a Solution (such as SYNC, H.Browser etc.).
Device VLAN ID
Set a VLAN ID to be assigned to external devices connected to the LAN OUT port.
