Samsung HCN5529WX/XAA, Service Manual

Page: 28 / 130

Alignment and Adjustments
2-24 Samsung Electronics
•
After Factory Auto convergence is complete, make sure that the cursor flickers for about
` 1 second on the center and then it is saved.
•
OSD shows error.
•
When any error happens, be sure to re-do Factory Auto Convergence.
•
When Convergence Adjustment is not normally done or the convergence center is
misaligned with the sensing point, any adjustment error happens. Therefore, be sure to use
a screen jig to correctly adjust during troubleshooting.
2. After the Convergence Adjustments are completde, press the key to exit.
3. DTV Convergence adjustment must be done same as the above Normal Mode Convergence Adjustment
(Use a 16 : 9 screen jig for DTV)
When Convergence Adjustment is not normally done or the convergence center is
misaligned with the sensing point, any adjustment error happens. Therefore, be sure to
use a screen jig to correctly adjust during troubeshooting.
CN479W 5- 473
HCN529W 5- 521
HCN559W
HCN5529W
5- 553
HCN659W 5- 653
Model Name Inch
47"
52"
55"
65"
Data Screen Display
■
Changes when applying Almighty-Cg, Module (How to extract the basic Cg Data)