T V O
P E R AT I O N
26
1
Press the
MENU
button.
Press the
…
or
†
button to
select “Channel”, then press the
ENTER
button.
2
Press the
…
or
†
button to
select “Air/CATV”, then press the
ENTER
button.
Press the
…
or
†
button to
select “Air”, “STD”, “HRC” or
“IRC”, then press the
ENTER
button.
Press the
EXIT
button to exit.
œ
If you are connected to an
antenna, press the
…
or
†
button
to select “Air”.
œ
If you connected cable, press
the
…
or
†
button to select the
type of cable system: “STD”,
“HRC” or “IRC”.
• “STD”, “HRC” and “IRC” identify various types of cable TV systems. Contact your local cable company
to identify the type of cable system that exists in your particular area. At this point the signal source
has been selected. Proceed to “Storing Channels in Memory Automatically”.
• Subscription cable services require service-specific requirement for viewing.
Antenna
: Ant.1
√
√
Air/CATV
: Air
√
√
Auto Program
√
√
Favorite Channels
√
√
Fine Tune
√
√
Add/Delete
√
√
†
More
Move
Enter
Return
Channel
T V
Antenna
: Ant.1
√
√
Air/CATV
: Air
√
√
Auto Program
√
√
Favorite Channels
√
√
Fine Tune
√
√
Add/Delete
√
√
†
More
Move
Enter
Return
Channel
T V
Air
STD
HRC
IRC
Selecting the Video Signal Source
Before your TV can begin memorizing the available channels, you must specify the type of
signal source that is connected to the TV (i.e., an antenna or a cable system).
Memorizing the Channels
Your TV can memorize and store all of the available channels for both “off-air” (antenna) and
cable channels. After the available channels are memorized, use the
CH
and
CH
buttons
to scan through the channels. This eliminates the need to change channels by entering the
channel digits.
BP68-00342A-00Eng_TV 3/30/04 8:51 PM Page 26
