20
Technical Instructions
■ This appliance must be installed by a qualified technician or installer.
■ Prior to installation, ensure that the local distribution conditions
(nature of the gas and gas pressure) and the adjustment of the
appliance are compatible.
■ The adjustment conditions for this appliance are stated on the label
(or data plate).
■ This appliance is not connected to a combustion products evacuation
device. It shall be installed and connected in accordance with current
installation regulations. Particular attention shall be given to the
relevant requirements regarding ventilaton.
■ Before installing, turn off the gas and electricity supply to the
appliance.
■ All appliances containing any electrical components must be earthed.
■ Ensure that the gas pipe and electrical cable are installed in such a
way that they do not touch any parts of the appliacne which become
hot.
■ Gas pipe or connector shouldn’t be bent or blocked by any other
appliances.
■ Check the dimensions of the appliance as well as the dimensions of
the gap to be cut in the kitchen unit.
■ The panels located above the work surface, directly next to the
appliance, must be made of non-flammable material. Both the strati-
fied surfacing and the glue used to secure it should be heat resistant,
to prevent deterioration.
■ Turn on appliance tap and light each burners.
Check for a clear blue flame without yellow tipping.
If burners shows any abnormalties check the following :
- Burner lid on correctly
- Flame spreader positioned correctly
- Burner vertically aligned with injector nipple
■ A full operational test and a test for possible leakages must be carried
out by the fitter after installaion.
■ The flexible tube shall be fitted in such a way that it cannot come into
contact with a moveable part of the housing unit and does not pass
through any space susceptible of becoming congested.
21
Appliance Specification
Model
GN642HFGD
GN642FFGD
Pan Support
Cast Iron
Support Wok
O
X
Top Plate
Tempered glass (8t)
Control Handle
Titan color
Weight (net)
13.5kg
13.0kg
Weight (gross)
16.2kg
15.7kg
Dimension (WxDxH)
594x510x46
594x510x46
Ignition device
Continuous Ignition Type
Gas Connection
1/2 inch female thread
Electric supply
220V~240V, 50/60Hz
Burner Feature
Triple crown(1EA),
Semi-rapid(2EA), Auxiliary(1EA)
Rapid(1EA), Semi-rapid(2EA),
Auxiliary(1EA)
○ APPLIANCE CLASS : Class 3
○ APPLIANCE CATEGORY :
BE/FR
GB/IT/PT/LT/ES/CZ/SK
PL
Cat.
II 2E+3+
II 2H3+
II 2E3B/P
P(mbar)
20/25 - 28-30/37
20 - 28-30/37
20-36
HU
Cat.
II 2H3B/P
P(mbar)
25-30
Technical Data for Engineers
W
H
D
D
W
H
