![background image](http://html.mh-extra.com/html/samsung/galaxy-w-gt-i8150/galaxy-w-gt-i8150_service-manual_340519003.webp)
SAMSUNG Proprietary-Contents may change without notice
7. Level 2 Repair
7-1
This Document can not be used without Samsung's authorization
1) After pressing Connector once, Check the connect
status
1) Don't touch with FPCB contact point,
Press evenly to the entire actuator.
1) When assembling the BRACKET, be careful to avoiding
damage on TOUCH KEY connectors.
1) Beware of VGA CAMERA's direction when assembling,
and push the VGA Camera rubber after assembling.
1
2
4
1) Connect the Main Camera connector.
1) Place LCD starting from the
Under
side of Front and push the outline of LCD
with hand lightly to attach it completely
2) Open TSP connector on LCD and
insert TSP FPCB alining with guide line
3) adhere insulating tape according to the
TSP IC guide line and press it gently and
evenly
1)LCD FPCB insert the right of the central hole
by BRACKET. And then Assemble and
BRACKET FRONT ASS'Y.
1) Place VGA CAMERA on it's position on
BRACKET.
2) Assemble VGA CAMERA RUBBER on it's
position guided by RIBs.
3
2
1
Assembling
2,3