background image

8

_ Important safety instructions

OVEN

DO NOT TOUCH HEATING ELEMENTS OR INTERIOR SURFACES 
OF THE OVEN.

 Heating elements may be hot even though they are dark 

in color. Interior surfaces of an oven become hot enough to cause burns. 
During and after use, do not touch or let clothing or other flammable 
materials contact heating elements or interior surfaces of oven until 
they have had sufficient time to cool. Other surfaces of the appliance 
may become hot enough to cause burns. Among these surfaces are 
oven vent openings and surfaces near these openings, oven doors, and 
windows of oven doors.

Do not heat unopened food containers.

 Build-up of pressure may 

cause the container to burst and result in injury.

Do not use the oven to dry newspapers.

 If overheated, they can 

catch on fire.

Do not use the oven for a storage area.

 Items stored in an oven can 

ignite.

Do not use harsh abrasive cleaners or sharp metal scrapers to clean the 
oven door glass since they can scratch the surface, which may result in 
shattering of the glass

Use care when opening door.

 Let hot air or steam escape before you 

remove or replace food in the oven.

Protective liners.

 Do not use aluminum foil to line the oven bottoms, 

except as suggested in the manual. Improper installation of these liners 
may result in a risk of electric shock or fire.

Keep oven vent ducts unobstructed.

 The oven vent is located above 

the right rear surface unit. this area could become hot during oven use. 
Never block this vent or place plastic or heat-sensitive items on it.

Placement of oven racks.

 Always place oven racks in the desired 

location while the oven is cool. If the rack must be moved while the oven 
is hot, do not let the potholder come in contact with the hot heating 
element in the oven.

During use the appliance becomes hot.

 Care should be taken  to 

avoid touching heating elements inside the oven.
Do not allow aluminum foil or a meat probe to contact heating elements.

FTQ307NWGX_XAA DG68-00228A.indd   8

2009-06-30     1:54:24

Summary of Contents for FTQ307 Series





































































Reviews: