Samsung FTQ307 Series User Manual Download

Page: 28 / 68

_ Using the warming drawer

TURNING ThE WARMING DRAWER ON OR OFF

. Set the warming drawer to the heat level you want.

Press the

WARMING DRAWER

pad once for low, twice for

medium, 3 times for high or 4 times for off.

The warming drawer starts automatically once you have finished
selecting the level you want.

. To turn the warming drawer off, press the

WARMING

DRAWER

pad until the warming drawer turns off.

Pressing the

•

CLEAR/OFF

pad does not turn the warming drawer off.

The warming drawer cannot be used during a self-cleaning cycle.

•

Recommended settings

LEVELS

TYPE OF FOOD

Low

Rolls (soft), empty dinner plates

Medium

Gravies, eggs, biscuits, pastries, casseroles, vegetables, rolls (hard),
roasts (beef, pork, lamb)

High

Bacon, poultry, pizza, hamburger patties, pork chops, fried foods

Different types of food may be placed in the warming drawer at the same time. For best

•

results, do not leave foods in the warming drawer for longer than 1 hour. Do not leave
smaller quantities or heat-sensitive foods, such as eggs, for longer than 30 minutes.

The warming drawer will shut off automatically after 3 hours.

•

FTQ307NWGX_XAA DG68-00228A.indd 28

2009-06-30 1:54:41

Summary of Contents for FTQ307 Series





































































Search results

Summary of Contents for FTQ307 Series

Reviews:

Related manuals for FTQ307 Series

Brands by name

Popular brands

Samsung FTQ307 Series, User Manual

Search results

Summary of Contents for FTQ307 Series

Reviews:

Related manuals for FTQ307 Series

Brands by name

Popular brands