66
The example of ERV PLUS option setting method
1. Press
Set
and
ESC
buttons at the same time for more than 3 seconds.
X
(Main menu) will be displayed and then press the
[
∧
]/[
∨
]
button to select no.6.
2. Press
[
＞
]
button to select the number you will set.
X
Press
[
∧
]/[
∨
]
button and select no.1
3. Press
[
＞
]
button to enter the data setting stage.
X
When you enter the setting stage, the current setting value will be displayed.
4. Press
[
＜
]
/
[
＞
]
button to select the desired Data1.
X
Press [<]/[>] button to select no.1.
X
The wired remote controller option is changed from “Nonuse of cold breeze
prevention” to “Use of cold breeze prevention”.
5. Press
Set
button to complete the option setting.
X
Save the setting value and exit to sub menu.
6. Press
Esc
button to exit to normal mode.
1 2 3 4
Data bit
Data1: Nonuse of cold breeze prevention
Data2: Cold breeze prevention: Non use of humidification when the heating THERM is off
Data3: No operation for air supply fan of defrosting operation
Data4: Nonuse of humidification in heating operation
Example of data setting stage display
Wired Remote Controller Installation/Service Mode
