Installation
Installation
English
22
STEP 8
Leveling the dishwasher
1.
Open the door and place the level
against the top of the tub on the inside
and check if the the dishwasher is level.
If it is not level, rotate the leveling legs
at the bottom front of the dishwasher
until the dishwasher is level.
See the first note below for instructions
on adusting the height of the front legs.
2.
Use the level to check if the dishwasher
is level front to back, as shown in the
figure to the right.
If the dishwasher is not level front to
back, adjust the height of the rear leg
until the dishwasher is level.
See the second note below for
instructions on adusting the the rear
leg.
NOTE
To prevent leaks from the door, make sure
that the front of the dishwasher is not
lower than the back.
3.
Open the door of the dishwasher
and check if both the tub and door
clearances are correct.
If not, rotate the leveling legs on the
bottom front of the dishwasher.
You can aslo check this by placing a
level against an inside front vertical
surface of the tub.
DW8000R_DD68-00210A-00_EN.indd 22
4/25/2019 11:10:53 AM
Summary of Contents for DW80R706 Series
Page 35: ...Memo DW8000R_DD68 00210A 00_EN indd 35 4 25 2019 11 11 10 AM ...
Page 36: ...DD68 00210A 00 DW8000R_DD68 00210A 00_EN indd 36 4 25 2019 11 11 10 AM ...
Page 71: ...Notas DW8000R_DD68 00210A 00_MES indd 35 4 25 2019 11 15 09 AM ...
Page 72: ...DD68 00210A 00 DW8000R_DD68 00210A 00_MES indd 36 4 25 2019 11 15 09 AM ...