Samsung DVD-VR320, Instruction Manual

Page: 29 / 110

English - 29
S
ystem Setup
❚
Digital Output
• PCM : Converts to PCM (2CH) 48kHz
audio. Select PCM when using the
Analog Audio Outputs.
• Bitstream : Converts to Dolby Digital Bitstream
(5.1CH). Select Bitstream when
using the Digital Audio Output.
❚
DTS
• Off : Doesn’t output digital signal.
• On : Outputs DTS Bitstream via digital output only.
Select DTS when connecting to a DTS Decoder.
❚
Dynamic Compression
This is only active when a Dolby Digital signal is
detected.
•
On : When Movie soundtracks are played at low
volume or from smaller speakers, the system
can apply appropriate compression to make
low-level content more intelligible and prevent
dramatic passages from getting too loud.
• Off : You can enjoy the movie with the standard
Dynamic Range.
Setting Up the Audio
Options
Allows you to setup the audio device and sound status
settings depending on the audio system in use.
1 With the unit in Stop mode/No Disc mode, press
the
MENU button.
2 Press the
…†
buttons to select Setup , then press
the OK or
√
button.
3 Press the
…†
buttons to select Audio , then press
the OK or
√
button.
Audio setup menu will be displayed.
4
Press the
…†
buttons to select the desired audio
option, then press the OK or
√
button.
5 Press the
…†
buttons to select the desired item,
then press the OK or
√
button.
Note
■
Press the RETURN or
œ
button to return to the
previous menu. Press the MENU button to exit
the menu.
No Disc Setup
System
√ √
Clock Set
√ √
Install
√ √
Language
√ √
Audio
√ √
Video
√ √
Parental Control
√ √
MOVE OK RETURN EXIT
Programme
Setup
No Disc Audio
Digital Output : PCM
√ √
DTS : Off
√ √
Dynamic Compression : On
√ √
MOVE OK RETURN EXIT
Programme
Setup
Note
Note
When DTS soundtrack is played, sound is not
output from Analog Audio Output.
Be sure to select the correct Digital Output or
no audio will be heard.