Samsung DVD-VR320/COM, Manual

Page: 28 / 249

5-18
Disassembly and Reassembly
Samsung Electronics
5-4-23 Slider S, T Ass’y Removal
1) Move the Slider S, T Ass’y Œ , ´ to slot, and then
lift it to remove. (Refer to arrow)
Œ
SLIDER S ASS`Y
´
SLIDER T ASS`Y
Fig. 5-36 Slider S, T Ass’y Removal
5-4-24 Plate Ground Deck, Cylinder Ass’y Removal
1) Remove the 3 Screws Π.
2) Lift the Plate Ground Deck ´ .
3) Lift the Cylinder Ass’y ˇ .
Assembly :
1) Match the 3 holes in the bottom of Cylinder ass'y
ˇ to the 3 holes of Main Base as attending not to
drop or knock the Cylinder ass'y ˇ .
2) Tighten the 1 Screw
Œ
.
3) Match the Plate Ground Deck ´ to the Hole of
Base Main.
4) Tighten the other 2 Screws Π.
Note :
1) Take care not to touch the Cylinder Ass'y ˇ and
the tape guide post at reinstalling.
2) When reinstalling, Don't push down too much on
Screw Driver.
Œ
3 SCREWS
´
PLATE GROUND DECK
ˇ
CYLINDER ASS'Y
Fig. 5-37 Plate Ground Deck, Cylinder Ass’y Removal