Samsung DVD-V530A, Instruction Manual

Page: 10 / 34

18 19
GB GB
Presetting the Stations Automatically
☛
You do not need to preset the stations if you have already
set them automatically (see Plug & Auto Set Up on page 13).
Your DVD-VCR contains a built-in tuner used to receive
television broadcasts.
You must preset the stations received through the tuner. This can
be done:
◆
Plug & Auto Set up (see page 13)
◆
Automatically
◆
Manually (see page 20)
You can store up to 80 stations.
1
After pressing the MENU, press the OK or
❿
.
Result: The Setup menu is displayed.
2 Press the corresponding ,
❷
buttons to select the Install
option.
3
Press the OK or
❿
to select this option.
Result: The Install menu is displayed.
4
Press the corresponding or
❷
buttons, until the Auto
Setup is selected.
And then press the OK or
❿
to select this option.
Result: A message appears, indicating that any channels
already preset on your DVD-VCR will be deleted.
5
Press OK to start the auto scanning.
Result:
◆ The Please Wait indication highlight on the
television screen.
◆
The first frequency band is scanned and the first
station found is displayed and stored.
◆ The DVD-VCR then searches for the second
station and so on.
◆ When the automatic scanning procedure has
finished, the DVD-VCR switches automatically to
programme 1.
➢
The number of stations automatically stored by the DVD-
VCR depends on the number of stations that it has found.
6
If you wish to cancel the auto scanning before the end, press
the RETURN button to exit the menu.
➢
◆
Once the auto scanning procedure has finished,
some stations may have been stored more than
once; select the stations with the best reception and
delete the ones no longer required (see page 21).
Auto Setup
Your date will be lost
Press OK to continue
Menu to exit
Auto Setup
Manual Setup
VCR Output CH : CH 38
Install
Language : English
User Set
Auto Power Off : Off
Screen Messages : On
Install
Setting the Menu Language
1 Open “MENU”
After pressing the MENU, press the OK or
❿
.
2 Select “Language”
Use the or
❷
buttons to highlight
“Language,” then press the OK or
❿
.
3 Set menu Language
Place the selection arrow next to your desired Language, then
press the OK button.
4
On completion, press RETURN to exit the menu.
Language : English
User Set
Auto Power Off : Off
Screen Messages : On
Install
Français
Deutsch
Español
Italiano
Nederlands
Language Set
English
OK
1
Auto Setup
Please Wait
15%
VCR
00316A DVD-V530A/XSA-GB1 10/14/03 4:39 PM Page 18