background image

39

38

Title/Chapter/Time Selection

To view the current Title, Chapter/Track, and counter position,
press the INFO  button during DVD playback. The Information
screen can also be used to quickly choose a title, chapter/track, or
playing time.

1

View the Display

During DVD/CD playback, press the INFO button on the 
remote control.

2

Select title

Use the UP/DOWN and LEFT/RIGHT buttons to select Title, then 
press the ENTER button to change among all available titles on the
disc.

3

Select Chapter or Track

Use the UP/DOWN and LEFT/RIGHT buttons to select Chapter or 
Track, then press the ENTER button to change among all 
available Chapters/Tracks on the disc.

4

Select Counter Position

Use the UP/DOWN and LEFT/RIGHT buttons to select the counter 
position indicator, then use the numeric buttons (0-9) to enter the 
desired counter position in the format H:MM:SS (H = Hours, M = 
Minutes, S = Seconds). 
Then press the ENTER button to enter the desired counter 
position.

To make the screen disappear, press the INFO button again.

1

4

ENG

ENG

ENG

ENG

ENG

ENG

- For 4:3 aspect ratio discs

•  Normal Wide

Displays the content of the DVD title in 16:9 aspect ratio.
The picture will look horizontally stretched.

•  Screen Fit 

The top and bottom of the screen are cut off and the full screen appears. The picture will
look vertically stretched.

•  Zoom Fit 

The top, bottom, left and right of the screen are cut off and the central portion of the screen
is enlarged.

•  Vertical Fit 

When a 4:3 DVD is viewed on a 16:9 TV, black bars will appear at the left and right of the
screen in order to prevent the picture from looking horizontally stretched.

3

If you are using a 4:3 TV

- For 16:9 aspect ratio discs

• 

4:3 Letter Box
Displays the content of the DVD title in 16:9 aspect ratio. 
The black bars will appear at the top and bottom of the screen.

• 

4:3 Pan Scan
The left and right of the screen are cut off and displays the central portion of the 16:9 screen.

• 

Screen Fit
The top and bottom of the screen are cut off and the full screen appears. The picture will look
vertically stretched.

• 

Zoom Fit
When a 4:3 DVD is viewed on a 16:9 TV, black bars will appear at the left and right of the
screen in order to prevent the picture from looking horizontally stretched.

- For 4:3 aspect ratio discs

• 

Normal Screen
Displays the content of the DVD title in 4:3 aspect ratio.

• 

Screen Fit
The top and bottom of the screen are cut off and the full screen appears. The picture looks
vertically stretched.

• 

Zoom Fit
The top, bottom, left and right of the screen are cut off and the central portion of the screen is
enlarged.

This function may behave differently depending on the type of disc.

EZ View

Most DVD discs are recorded in chapters so that you can
quickly find a specific passage.

Allows playback of the film from a desired time.
You must enter the starting time as a reference.

Refers to the language of the film soundtrack. In the
example, the soundtrack is played in English 5.1CH. A DVD
disc can have up to eight different soundtracks.

To access the desired title when there is more than one in
the disc. For example, if there is more than one movie on a
DVD, each movie will be identified.

Title

Chapter

Time

Audio

Refers to the subtitle languages available in the disc.
You will be able to choose the subtitles language or, if you
prefer, turn them off from the screen. A DVD disc can have
up to 32 different subtitles.

A surround sound effect is generated using only two front
speakers.

Subtitle

3D Sound

00222A DVD-V3800/XAA-Eng3  7/28/03 3:40 PM  Page 38

Summary of Contents for DVD-V3800




































Reviews: