41
40
Using the Assemble Edit Function
This function allows you to start a new recording at a specific
position on the cassette while maintaining a very smooth scene
change.
1
Insert the cassette to be edited in your DVD-VCR.
2
Press the
ll button to start playback.
3
When you reach the position from which you wish to start the new
recording, press the
ll button.
4
Press the
帧进（F.ADV/STEP）
button again as often as
necessary to advance frame by frame, until the exact recording
position is located.
5
While the DVD-VCR is in still mode, hold the
录像( R E C )
b u t t o n
(
●
) down for a while to activate the Assemble Edit function.
6
Select the source from which you wish to record by pressing:
◆
The
节目(PROG)
( or ) buttons for television channels
◆
The
输入选择(INPUT SEL.)
button for the LINE input sources
7
Press the
ll button to start recording.
8
When you have finished recording, press
■
.
2
5
4
You can copy a cassette to your DVD-VCR from another video
source, such as another VCR or a camcorder.
☛
It is an infringement of copyright laws to copy prerecorded
cassettes or to re-record them in any form without the
permission of the owners of the corresponding copyright.
1
Connect the DVD-VCR, fromwhich the cassette is to be copied, to
the appropriate RCA audio and video input connectors on the
rear of your DVD-VCR, as indicated on page 11.
2
Insert a blank cassette in your DVD-VCR.
3
Insert the pre-recorded cassette in the other video source (VCR or
camcorder).
4
Press the
输入选择(INPUT SEL.)
button to select the appropriate
input on your DVD-VCR: LINE IN for the RCA input.
5
Start playing back the cassette to be copied.
6
Hold
录像(REC)
(
●
) down for a while to start recording on your
DVD-VCR.
7
When you have finished recording, press
■
on bothVCR and
DVD-VCR.
➢
If you wish to view the cassette being copied:
◆
Your DVD-VCR must be connected as usual to the
television (see page 11 for further details)
7
2
VCR
VCR
Connecting an RCA Audio/Video Input Cable
You can connect other audio/video equipment to your DVD-VCR
using audio/video cables if the appropriate outputs are available on
the equipment chosen.
Examples:
◆
You wish to copy a video cassette with the help of a
second VCR .
◆
You wish to play back and/or copy pictures taken
with a camcorder .
☛
◆
Make sure that both the television and the DVD-VCR
are switched off before connecting the cables.
1
Connect one end of the RCA audio/video cable into the VIDEO
INPUT socket on the rear of the DVD-VCR.
2
Plug the other end of the audio/video cable into the appropriate
output connector on the other system (VCR or camcorder).
3
Connect one end of the RCA audio cable supplied into the AUDIO
INPUT sockets on the rear of the DVD-VCR.
➢
Take care to respect the colour coding of the left and right
channels.
4
Plug the other end of the audio cable into the appropriate output
connectors on the other system (VCR, camcorder or Hi-Fi sound
system).
1
3
3
VCR
Recoding from Another VCR or Camcorder
DVD-90K_CHN-GB2.q 2003.4.11 11:16 AM 页面40
