Samsung DVD-R4000, Operating Instructions Manual

Page: 34 / 80

34
Timer recording (continued)
Manual programming
[RAM] [DVD-R]
Remote control only
You can set your own programming conditions (up to 16
programmes).
Preparation
≥
Switch [DVD, TV]
(15)
to “DVD”.
≥
Ensure that this unit’s clock is set correctly.
≥
Insert a disc for recording (make sure there is enough room for
the programme you are going to record plus a little extra).
1
Press [PROG/CHECK]
(13)
.
≥
The Timer Programme List screen appears.
A line that is ready for programming is highlighted.
2
Press [ENTER]
(10)
.
≥
The Timer Programme Correction screen appears.
3
Use [
1
]
(10)
to move through the items and change
the items with [
3
,
4
]
(10)
.
≥
The current settings are shown each time you press [
1
]
(10)
.
≥
You may use the numeric buttons
(4)
to enter “Name”,
“Date”, “Start” and “Stop”.
≥
Name
(Programme Position/TV Station Name)
≥
Date
Current date > the day before one month later >
Daily (Sunday to Saturday) > Daily (Monday to Saturday) >
Daily (Monday to Friday) > Weekly (Sundays) > ... >
Weekly (Saturdays)
≥ Start (start time)/Stop (finish time)
The time increases or decreases in 30-minute increments if
you hold the button.
≥
Mode (Recording mode)
XP
>
SP
>
LP
>
EP
>
FR (page 26)
≥ PDC
ON > OFF (
jjj
) (page 33)
≥ Title
Select “Title” and press [ENTER]
(10)
, then refer to page 37
for entering title.
4
Press [ENTER]
(10)
when you have finished making
changes.
≥
To continue programming:
Repeat steps 2, 3, and 4.
5
Press [PROG/CHECK]
(13)
or [RETURN]
(23)
.
To put the unit on recording standby
Press [ , TIMER]
(12)
.
Ensure “ ” lights on the unit’s display.
To change the timer recording programme
1) While the Timer Programme List Screen is being shown, use
[
3
,
4
]
(10)
to select the programme you want to change,
and press [ENTER]
(10)
to show the Timer Programme
Correction screen.
≥
You may also select programme by inputting a 2-digit
number using the numeric buttons
(4)
.
≥
Use [
2
,
1
]
(10)
to move to the page preceding or following
the one on display.
2) Move through the items with [
1
]
(10)
and change the settings
with [
3
,
4
]
(10)
and press [ENTER]
(10)
.
Note
≥
The built-in clock employs 24-hour system.
≥
The remaining time is not shown if you insert discs other than
DVD-RAM or DVD-R.
≥
The remaining time displayed is calculated based on the current
recording mode.
≥
If the disc is protected (pages 38, 72), the unit switches to
standby but does not go on standby for recording. Check the
disc carefully.
≥
Recording is not possible unless you set “Disc Protection” in
“DISC INFORMATION” to “Off” (page 38).
≥
You cannot record to a disc if the write protect tab on a cartridge
disc is set to protect. Release this before operation (page 72).
≥
Even if the unit is put in the timer recording standby mode or the
timer recording is being performed, you can play a programme.
≥
If the unit is not put in the timer recording standby mode at the
latest 10 minutes before the programmed timer recording
starting time, the [
] flashes on the unit display. In this case,
press the [ , TIMER]
(12)
button to put the unit in the timer
recording standby mode.
≥
When recording more than one programme in a row, for DVD-
RAM the first few seconds, and for DVD-R about the first 30
seconds of all programmes from the second one onwards will
not be recorded.
RETURN
SELECT
SP OK 1:22 1:19 BBC 1 16/ 7 TUE 01
Mode
Disc
space
Stop Start No. Name Date
1:58 SP
TIMER
RECORDING
Remain
1:19:00 16.7 TUE
ENTER
New Timer Programme
OFF
PDC
Press ENTER to store
new programme.
RETURN
No.
SELECT
1:58 SP
TIMER
RECORDING
Remain
1:55:00 16.7 TUE
ENTER
--
0 9
--:-- -- ----------
Mode Stop Start Name Date
--:-- -- SP ----
PDC
Please set Channel.
---
Title
1:58 SP
TIMER
RECORDING
Remain
1:19:00 16.7 TUE
2:00 16/ 7 TUE
Mode Stop Start Name Date
SP BBC 1
1:00
PDC
OFF
Title