ENG-16
C
O N N E C T I O N S
Note
- When you connect the DVD player to DTS Amplifier and play a DTS disc, set the DTS to On in Audio
Setup menu. If it is set to Off, sound will not be heard, or there will be a loud sound.
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause
damage to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier. (See pages 51 to 52)
- The position of terminals may vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
Connection to an Audio System (Dolby digital, MPEG2 or DTS Amplifier)
1
If using an optical cable (not included), connect the
DIGITAL
AUDIO OUT (OPTICAL)
terminal on the rear of the DVD player
to the
DIGITAL AUDIO IN (OPTICAL)
terminal of the Amplifier.
If using a coaxial cable (not included), connect the
DIGITAL
AUDIO OUT (COAXIAL)
terminal on the rear of the DVD player
to the
DIGITAL AUDIO IN (COAXIAL)
terminal of the Amplifier.
2
Using the video signal cable(s), connect the
VIDEO, S-VIDEO
or
COMPONENT OUT
terminals on the rear of the DVD player
to the
VIDEO, S-VIDEO
or
COMPONENT IN
terminal of your
TV as described on pages 11 to 14.
3
Turn on the DVD player, TV, and Amplifier.
4
Press the input select button of the Amplifier to select
external
input
in order to hear sound from the DVD player.
Refer to your Amplifier's user manual to set the Amplifier's
audio input.
Optical Cable
(not included)
Coaxial Cable
(not included)
or
Dolby digital or
DTS amp
00708C_P450_XSS_eng_1 2/26/05 10:31 PM Page 16
Summary of Contents for DVD-P450
